Overview
The Bushwacker Ford Max Coverage Fender Flare Set, part number 20927-02, is a set of four paintable flares for the front and rear of a truck, with 2.25 inches of width and coverage. The flares are designed for the Ford F-150.
The flares are molded from Dura-Flex 2000, which is thick, warp-resistant and UV protected. Recessed stainless steel bolts give a bolt-on look, and the design complements oversized tires and high-clearance lift kits.
The OEM-style matte black finish is easy to paint and resists chalking. Installation takes minimal drilling.
The design is aimed at the Ford F-150 truck line.
Mounting uses recessed stainless steel bolts and requires minimal drilling, so plan for some drilling when mounting the set.
Key features
- Four flares for the front and rear positions
- 2.25 inches of width/coverage
- Installs easily with minimal drilling required
- Recessed bolt-on styling
- Thick, warp-resistant Dura-Flex 2000 material
- OEM matte black finish, paintable
Measuring tire clearance
Before mounting, measure the distance from the fender edge to the tire at the top and at the rear of the wheel opening. Flares add coverage, but they do not change the geometry of the suspension. A tire that rubs on the liner will still rub after the flare is installed.
Recessed bolts help a flare sit flush, but the mounting surface should be clean and free of rust. Check the bolts after the first few drives and re-tighten them as needed. Keep an eye on the paint at the edges, since chips there can lead to rust over time.
- Measure fender-to-tire gap at the top and rear
- Clean and inspect the mounting surface
- Re-tighten bolts after the first few drives
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 20927-02 |
| UPC | 90689111647 |
| Quantity | Set of 4 |
| Position | Front and rear |
| Width/coverage | 2.25 in |
| Material | Dura-Flex 2000 |
| Finish | OEM-style matte black, paintable |
| Front pair part number | 20071-02 |
| Rear pair part number | 20072-02 |
Vehicle fitment
The flares are designed for the Ford F-150.
Before ordering, confirm your vehicle’s year, model and trim match the F-150 you own.
Installation notes
Minimal drilling is needed, so mark and check each mounting point before drilling any body panel.
What’s included
A set of four Max Coverage fender flares for the front and rear positions.









