Overview
The Bushwacker Ford OE Style Fender Flare Set in Magnetic Grey Metallic, part number 20937-6A, is four pre-finished front and rear flares matched to the Magnetic Grey Metallic finish. Bushwacker lists them for the 2016-2017 Ford F-150, with up to 0.50 inches of tire coverage from debris.
The OE Style design adds more tire coverage and clearance for trucks and SUVs while protecting the vehicle from dirt and debris. The flares are made in the USA from warp-resistant Dura-Flex 2000 that is 100% UV protected, and they are shaped to suit each application.
The metallic color is already applied, so no paint step is described before installation.
The Magnetic Grey Metallic finish is matched to the truck paint, so each flare sits in the same color as the body panel beside it.
Edge trim and stainless steel hardware come installed on each flare, so installation is quick and needs no drilling.
The up-to-0.50-inch coverage figure is the number to compare with your tire width before ordering.
Key features
- Pre-finished Magnetic Grey Metallic
- Up to 0.50 inches of tire coverage, front and rear
- Edge trim and stainless steel hardware pre-installed
- Installs easily with no drilling required
- 100% UV protected Dura-Flex 2000
Matching metallic paint
Metallic finishes reflect light in a way that makes small color differences easier to spot, so the fit of the flare against the body panel matters. Pre-finished flares remove the question of paint match, but the apparent color still depends on how the flare sits beside the panel in daylight. Check color and gap together after installation, since a flare that sits a little off can look different from the panel it is meant to match.
Metallic paint is best kept clean with mild soap and water. Avoid strong solvents and abrasive pads, which can dull the metal flakes over time. Inspect the edges after off-road trips for chips or stress cracks, and clear mud that dries in the gap so it does not trap moisture behind the flare.
- Check color in daylight after mounting
- Wash with mild soap only
- Avoid abrasive pads on metallic finish
- Inspect edges after off-road trips
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 20937-6A |
| UPC | 700008511481 |
| Quantity | Set of 4 |
| Position | Front and rear |
| Width/coverage | 0.50 in |
| Color | Magnetic Grey Metallic, pre-finished |
| Material | Dura-Flex 2000 |
Vehicle fitment
It is designed for the 2016-2017 Ford F-150 in the King Ranch, Lariat, Limited, Platinum, SSV, XL and XLT trims.
The list does not include the Super Duty or any F-150 year other than 2016-2017. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A set of four pre-finished OE Style fender flares in Magnetic Grey Metallic, with the edge trim and hardware fitted.











