Overview
The BedRug Premium Front Floor Liner Kit with Heat Shields, part number BEDBRCYJ76F, is a charcoal front floor liner kit for early Jeep Wranglers and the CJ7. It fits the 1976–1986 Jeep CJ7 and the 1987–1995 Jeep Wrangler (YJ), in several trim levels.
The carpet-look surface is 100% polypropylene, a plastic that is tough and resists fading and UV exposure. The foam beneath it resembles life-jacket foam and does not absorb water, so it will not mold or mildew. The kit works as an alternative to spray-in liners and needs no grinding of factory paint.
Key features
- Carpet-look 100% polypropylene surface built to resist impact dings and harsh conditions
- Waterproof foam backing that will not mold or mildew
- UV and fade resistant material
- Heat shields included with the front floor liner kit
- Installs without removing seat brackets or the center console
- 3-year warranty
Older floors and heat shields
Early Wrangler and CJ floors were often bare metal or thin carpet, and years of water can leave rust or soft spots underneath. Replacing the liner without checking the floor can trap moisture against the metal. A quick look under the old carpet before fitting a new kit is a practical step that protects the floor for years.
Heat shields help keep warmth from the transmission and exhaust area from reaching the footwells. They sit between the floor and components that run hot, so they should lie flat and clear any moving parts or wiring. Once the kit is in, recheck the shields after the first few drives, since a loose fastener can let them rattle.
- Look for rust or soft spots before fitting
- Check that heat shields lie flat
- Recheck shield fasteners after the first drives
Specifications
| Brand | BedRug |
|---|---|
| Part number | BEDBRCYJ76F |
| Position | Front |
| Color | Charcoal |
| Included | Heat shields |
| Material | 100% polypropylene carpet-like fibers |
| Backing | Foam similar to that used in life jackets |
| Warranty | 3-year |
Vehicle fitment
It fits the 1976–1986 Jeep CJ7, including Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade versions, and the 1987–1995 Jeep Wrangler (YJ), including Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport versions.
Its fit is limited to the CJ7 and YJ years above. For the TJ, LJ, JK or later Wrangler generations, or for Cherokee, Comanche or other Jeep models, confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The kit installs without removing the seat brackets or the center console, which takes less time than fitting a spray-in liner.
What’s included
A front floor liner kit with heat shields.














