Overview
The BedRug BedTred front floor kit in charcoal, part BTJK07F4, is a custom-molded floor piece for the front of the four-door Jeep Wrangler JK Unlimited. It fits 2007–2018 Unlimited JK models in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, and the 2018 Jeep Wrangler JL Unlimited Moab.
BedTred is 100% waterproof, does not absorb water and resists harsh chemicals, so the front pieces can be removed and hosed off after time on the trail. A 1/4-inch thick, 100% polypropylene foam layer beneath it insulates the cabin from road noise and heat. The front and rear kits are separate products, so a complete floor setup needs both.
Key features
- Die-cut front floor piece for four-door Unlimited models
- BedTred surface: 100% waterproof, no water absorption
- 1/4-inch thick insulating foam, 100% polypropylene
- Dries quickly and resists harsh chemicals
- Pieces removable for cleaning with a hose
Front floor and seat clearance
Front floor liners have to work around seat tracks, floor brackets and the console area, so fit depends on how the seats sit. Before a long trip, slide the seats through their full travel and confirm the liner stays flat without bunching or pressing on the tracks. Heavy gear placed under a seat can also shift the liner, so keep that area clear when loading.
Four-door Unlimited cabins often carry more gear, and the front floor sees wet and gritty traffic from every entrance. Brush debris away from the seat tracks, and check that the liner does not catch when the seats are pushed back. Rattles usually point to a corner that has lifted or a piece that has shifted, so re-seat the edges and recheck after the next outing.
- Slide seats through full travel to check clearance
- Keep the area under seats free of loose gear
- Brush debris from seat tracks regularly
- Re-seat edges if rattles develop
Specifications
| Brand | BedRug |
|---|---|
| Part number | BTJK07F4 |
| Position | Front |
| Color | Charcoal |
| Surface | BedTred, 100% waterproof |
| Foam | 1/4-inch thick, 100% polypropylene |
| Fitment type | Direct fit |
Vehicle fitment
It fits the four-door Wrangler JK Unlimited from 2007 through 2018 in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, and the 2018 JL Unlimited Moab.
Two-door JK models are not on this list, and the JL is listed only for the Unlimited Moab. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No seat bracket or center console removal is needed, and factory paint does not have to be removed or ground down during installation.
What’s included
The charcoal front floor kit for part BTJK07F4. Not included: the rear kit.












