Overview
The Nifty Pro-Line Replacement Carpet Kit in Coffee, part number NIF65008, replaces worn floor carpeting in the front and rear of the Jeep CJ7 from 1976 to 1986 and the Jeep Wrangler (YJ) from 1987 to 1995.
Nifty builds each carpet from OE-grade nylon cut-pile with mildew-resistant padding and vinyl heel pads. Each piece is pressure-formed and trimmed to the shape of the vehicle floor and electronically welded in place, which gives a look similar to the original equipment design.
Key features
- Coffee color carpet for the front and rear floor positions
- OE-grade nylon cut-pile face with mildew-resistant padding
- Vinyl heel pads on the molded carpet
- Pressure-formed and trimmed to the exact shape of the floor
- Electronically welded in place, so no messy glue is needed
- The installation instructions are easy to follow.
Restoring a Jeep floor
On older Jeep CJ and YJ models the floor carpet takes a lot of wear from boots, sand and water coming in through the doors. Replacing it restores the cab’s appearance and removes damp padding that can hold odor. A new carpet is easier to keep in good condition when the floor pan underneath is dry and free of rust.
Soft top and removable hardtop Jeeps are prone to water entry at the seams. Check the weatherstripping and drain plugs before fitting new carpet, since a leak that is left alone will soak the replacement quickly. Keep the carpet away from the seat tracks and the transmission tunnel cover so the seat bolts can be reached.
Once installed, carpet cleans best with a stiff brush and a damp cloth, then air drying with the doors open. Avoid soaking the pile, which can take a long time to dry in the padding.
- Check the floor pan for rust before fitting
- Inspect door seals and drain plugs for leaks
- Protect carpet edges from the seat track area
Specifications
| Brand | Nifty |
|---|---|
| Part number | NIF65008 |
| Product type | Replacement carpet kit (Pro-Line molded carpet) |
| Position | Front and rear |
| Color | Coffee |
| Fitment type | Direct fit |
| Carpet face | OE-grade nylon cut-pile |
| Padding | Mildew-resistant |
| Heel pads | Vinyl |
Vehicle fitment
It fits the 1976–1986 Jeep CJ7 with the Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims, and the 1987–1995 Jeep Wrangler (YJ) with the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
It does not fit the Jeep TJ, LJ or later Wrangler generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Each carpet is welded in place, so no messy glue is needed, and no unique tools are required. The instructions are easy to follow, and the pressure-formed shape is designed to match the floor without trimming on site.
What’s included
A front and rear carpet kit in Coffee. Check the packing contents against the front and rear floor areas before fitting.









