Overview
The Baja Designs A-Pillar Light Mount Kit, part BAJ447006, is a bracket that bolts to the stock windshield mounting location on a 2007–2018 Jeep Wrangler JK. It fits two-door and four-door (Unlimited) models in the trims shown in the vehicle fitment section.
The brackets carry Squadron Sport, Squadron Pro, XL Sport, XL Pro, XL80 and XL Racer auxiliary lights. They are CNC laser cut for precision, finished in satin black powder coat, and made 100% in the USA. Minor trimming is needed for a proper fit, so allow time for that step.
Key features
- Bolts to the stock windshield mounting location
- CNC laser cut for precision
- Satin black powder coat
- Built for Squadron Sport, Squadron Pro, XL Sport, XL Pro, XL80 and XL Racer lights
- Made 100% in the USA
- Minor trimming needed for proper fitment
Windshield-mount wiring and clearance
An A-pillar bracket sits close to the windshield frame, the wiper area and the top corners of the cabin, so think about sightlines before choosing a light position. Lights placed higher on the pillar throw a wider pattern, while lower placements reduce glare off the hood. Keep the beam from blocking the mirror or the driver’s view of the trail edges.
Wiring should run through a fused relay with a switch within reach of the driver. Route the harness along existing trim and away from the airbag area. Re-check the bracket bolts after the first few trail runs, since vibration can slowly loosen fasteners on a windshield-mounted part. Fresh powder coat scuffs easily at the mounting points, so use touch-up paint if the finish chips during install.
- Check the light’s mounting pattern before buying
- Keep the aiming screws accessible for trail adjustments
- Confirm clearance with the hardtop or soft top installed
Specifications
| Brand | Baja Designs |
|---|---|
| Part number | BAJ447006 |
| Mount type | Bracket mount only |
| Mounting location | Stock windshield mount |
| Finish | Satin black powder coat |
| Manufacturing | CNC laser cut |
| Compatible lights | Squadron Sport, Squadron Pro, XL Sport, XL Pro, XL80, XL Racer |
| Fitment listing | Direct Fit |
Vehicle fitment
Baja Designs lists these brackets for the 2007–2018 Jeep Wrangler JK, including the two-door and Unlimited four-door trims named on the list, such as Rubicon, Sahara, Sport, Sport S and X.
Other Wrangler generations, such as JL and TJ, are not in this list. Check your body style and trim against the names above.
Installation notes
Lights should be wired through a fused relay, and local rules for road-use lighting apply. Expect minor trimming before the brackets sit correctly, as the brand notes. Check the fit against the stock windshield mount before final tightening.
What’s included
Bracket mount only. The Squadron and XL auxiliary lights are sold separately and are not included.











