Overview
The Baja Designs A-Pillar Pro Kit, part number 447505, is an A-pillar light mounting kit with brackets, hardware, two Squadron Pro spot lights and wiring for the 2018 Jeep Wrangler JL. A-pillar mounts hold lights on the windshield pillars, and Baja Designs says these mount to the JL’s factory mounting locations with no trimming or modification to the vehicle.
The brackets are powder coated steel and are designed to hold up to the elements. The spot lights use four Cree LEDs for a rated 4,900 lumens at 5000K, with a hard coated polycarbonate lens, a powder coated cast aluminum housing and a billet machined aluminum bezel. The brand names its S2 and Squadron series lights as compatible with these brackets.
Key features
- Mounts to factory A-pillar locations with no trimming or modification
- Four Cree LEDs rated 4,900 lumens at 5000K
- IP69K waterproof and submersible to 9ft, with a moisture block and rain proof design
- Exceeds MIL-STD810G testing and is IK10 compliant for mechanical impact
- Built-in overvoltage protection
- Hard coated polycarbonate front lens with billet machined aluminum bezel
Wiring and fusing for spot lights
Spot lights draw meaningful current, so the wiring needs a fuse and relay between the battery and the switch. Route the feed through the firewall grommet and keep it clear of hot components and sharp edges. A relay keeps the switch load light, and a fuse near the battery protects the run if the wire is pinched.
Aim the spots on level ground and recheck after the first few trail runs, since vibration can move a lightly tightened bracket. Clean the lenses regularly, and check the seals around the housings for cracks or gaps that could let moisture in. Confirm local road-use rules before driving with the spots switched on.
- Use a fuse and relay between battery and switch
- Route the feed through the firewall grommet
- Aim on level ground and recheck after trail runs
- Inspect lens seals and clean the lenses
Specifications
| Brand | Baja Designs |
|---|---|
| Part number | 447505 |
| UPC | 819314026886 |
| Color | Black |
| Mounting type | A-Pillar |
| Light output | 4,900 lumens |
| Color temperature | 5000K |
| LEDs | 4 Cree LEDs |
| Wattage and amps | 40W / 2.9A |
| Light dimensions | 3.07 in x 2.77 in x 3.07 in |
| Listed weight | 12 ounces |
| LED life expectancy | 49,930 hours |
| Front lens | Hard coated polycarbonate |
| Housing | Powder coated cast aluminum |
| Bezel | Billet machined aluminum |
| Bracket finish | Powder coated steel |
| Hardware and bracket material | Stainless steel |
| Ingress rating | IP69K, submersible to 9ft |
| Impact rating | IK10 |
| Testing | Exceeds MIL-STD810G |
Vehicle fitment
It fits the 2018 Jeep Wrangler JL in the Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims. It is a direct fit A-Pillar mount. Confirm your vehicle’s year, model and trim before you buy.
Earlier Wrangler generations, including the JK, and the Jeep Gladiator are not covered.
Installation notes
The brackets mount to the factory locations and hardware is included for the mount. Wire the lights through a fuse and relay, as is standard for auxiliary lighting, and check local road-use rules before driving with the spots on public roads.
What’s included
Brackets, hardware, two Squadron Pro spot lights and wiring.
Not included: Wiring harness 613600 is a companion part for a simpler upgrade and is not among the included items.












