Overview
The Baer Brakes Track4 front brake system, part number 4301512R, is a complete front disc brake kit with a red T4 four-piston caliper and a 13 inch one-piece slotted, drilled and zinc plated rotor. It is made for two-wheel-drive Chevrolet C10 and GMC C15 pickups from 1960 to 1986, and it mounts on CPP 2.5 inch drop modular spindles.
Baer designed the Track4 for owners who want stronger front braking on a classic truck that runs larger wheels. The rotor and caliper are sized for wheels 17 inch in diameter or larger. The spindles are not part of the kit, so the truck needs CPP 2.5 inch drop spindles already installed before this brake system is fitted.
Key features
- Four-piston T4 caliper in red, with staggered pistons designed to reduce uneven pad wear
- Stainless steel pistons, abutments and noise suppression clips
- Dual dust, weather and pressure seals on the caliper
- One-piece slotted, drilled and zinc plated iron rotor, 13 inch diameter
- Powder coated caliper body, CNC machined from forged or billet aluminum
- Billet aluminum hubs with premium bearings packed with Redline synthetic grease and billet dust caps
- Stainless braided steel hoses, DOT approved, with mounting brackets and hardware
- Uses FMSI D0749 brake pads
Before you buy
A front disc upgrade changes more than the brakes. Wheel offset, tire size and steering geometry all affect how a truck feels once the bigger rotor and caliper are in place. Classic trucks often have older bushings and linkage that deserve attention before performance brakes go on. Look at the wheels you plan to run before ordering, and make sure they clear the caliper and rotor with room to spare.
Front wear items are often replaced during a brake job on an older truck. Inspect the tie rod ends, ball joints and wheel bearings while the front end is apart, since worn parts can make a new brake system feel less solid. Brake lines and the master cylinder are worth checking too, because the system depends on all of them working together.
- Check wheel clearance against the caliper and rotor
- Inspect steering and suspension joints during installation
- Confirm the master cylinder can supply the larger caliper
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301512R |
| UPC | 844165050797 |
| Caliper | T4, four-piston, fixed, red |
| Rotor | 13.0 inch, one-piece, vented, slotted and drilled, zinc plated iron |
| Rotor thickness | 1.1 inch |
| Pad type (FMSI) | D0749 |
| Axle and drive | Front, 2WD |
| Minimum wheel diameter | 17.0 inch |
| Bolt pattern | 5 lug, 5 x 5.00 inch |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Spindle type | CPP Nodular Iron 2.5 inch drop |
| Spindles included | No |
| Brake hose | Steel braided, DOT approved |
| Template | Q082H |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
It fits 1960-1986 Chevrolet C10; 1967-1986 Chevrolet C10 Suburban; 1960-1966 and 1987-1989 Chevrolet Suburban; 1966 GMC 1000; 1960-1965 GMC 1000 Series; 1975-1978 GMC C15; 1967-1974 GMC C15/C1500; and 1979-1986 GMC C1500.
It covers two-wheel-drive trucks only, and later C/K pickups fall outside the years above. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The billet hubs come assembled with bearings already packed with grease, and mounting brackets, braided hoses and hardware are included. The 1/2-20 x 2.25 inch wheel studs on the 5 x 5.00 inch pattern need lug nuts, which are not supplied with the kit. Lift and support the truck on jack stands before removing any wheel, and confirm the spindles are the CPP 2.5 inch drop type before the rotor goes on.
What’s included
Billet aluminum hubs assembled with bearings, T4 four-piston calipers, 13 inch one-piece rotors, mounting brackets, stainless braided hoses, hardware and billet dust caps.
Not included: CPP 2.5 inch drop spindles and lug nuts.














