Overview
The Baer Brakes 4262236B is a black-finished rear disc brake kit for Ford 9 Inch axles with Torino (late big) bearing housing ends and a 5×4.50/5×4.75 wheel bolt pattern. Its core is a 12 inch S4 four-piston caliper on a 1-piece slotted, drilled, zinc plated rotor, paired with a park brake shoe assembly that Baer houses inside its backing plate.
The 12 inch S4 fits most wheels 16 inch or larger. Fit with every wheel style cannot be guaranteed, so compare the S113E template with the wheel you plan to run.
Key features
- Black S4 caliper with four pistons and hard anodized aluminum pistons
- 12.0 inch 1-piece vented rotor with a slotted, drilled, zinc plated face
- Dual seals rated for dust, weather and pressure, with noise suppression clips
- Backing plate that serves both as caliper mount and park brake housing
- Braided steel hoses, DOT approved
- Powder coated finish; parts CNC machined from US sourced forged or billet aluminum
Choosing the right setup
Rear disc conversions on a 9 inch axle are usually decided by the housing end and the wheel together. Before buying, match the axle flange and bolt pattern to your housing, then check that the rotor’s diameter leaves room behind your spokes and clears the caliper. Wheel offset and backspacing matter as much as diameter, because a wheel that clears the rotor on paper can still rub the caliper body.
Rear brake upgrades often go hand in hand with a brake line and proportioning review, since a larger caliper changes how much fluid the system moves. Pads, hoses and park brake cables wear at different rates, so plan to inspect them together when the rear end is opened for work.
- Check rotor clearance against the inner barrel of your wheel
- Inspect park brake cables and shoes at each service
- Replace hoses that show cracking or bulging
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262236B |
| UPC | 844165029403 |
| Sold as | Kit |
| Caliper | S4, 4 pistons, fixed type |
| Caliper color | Black |
| Rotor outside diameter | 12.0 inch |
| Rotor type and construction | 1-piece, vented |
| Rotor material | Iron |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor thickness | 1.02 |
| Pad FMSI number | DR1-C |
| Brake hose | Steel braided, DOT approved |
| Park brake | Included; park brake cables not included |
| Axle flange | Ford 9 Inch Torino/Late Big Bearing |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 16.0 inch |
| Template | S113E |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
This kit is built around a rear axle end rather than a single vehicle. Its identifying details are the Ford 9 Inch Torino/Late Big Bearing axle flange, a 5 lug count and the 5×4.50/5×4.75 bolt pattern. Compare the S113E template and the 16.0 inch minimum wheel diameter with your axle before deciding.
The axle flange and bolt pattern identify the rear end only, so the vehicle’s year, model and trim must be matched separately. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables are not included, so you will need to source them separately to connect the park brake. The hoses supplied are braided. Use the template to check the 16.0 inch minimum wheel diameter against your wheel. A shop familiar with rear disc brake installs is the right choice for this work.
What’s included
Included are the 12.0 inch 1-piece rotor, the black S4 four-piston caliper, the backing plate with its park brake shoe assembly, and the braided brake hoses. Check the package contents against your installation before starting.
Not included: park brake cables, lug nuts, and a front rotor.















