Overview
The Baer Brakes 4261577R is a front brake kit with an 11.29 inch, slotted, drilled and zinc plated one-piece integral hub rotor, designed for Wilwood Pro Mii spindles with a 5×4.75 wheel bolt pattern. The spindle type is given as Wilwood Mustang II Pro, so check your spindle before anything else. No vehicle is named for this kit.
Baer positions this Classic Series system for smaller wheels, with a minimum wheel diameter of 15.0 inch. Two red powder coated PGC calipers, each a 2-piston pad guided aluminum design, use D0412 pads with ceramic friction material. Dust and weather seals, premium bearings and mounting brackets come with the kit.
Key features
- Aluminum 2-piston, pad guided caliper with a floating design
- Red powder coated caliper with a black Baer logo
- 11.29 inch vented 1-piece integral hub rotor, slotted, drilled and zinc plated
- Uses the common FMSI D0412 brake pad with ceramic friction material
- DOT approved braided brake hoses in steel
- Premium bearings with races pre-installed, dust caps and dust and weather seals
- Mounting brackets and all necessary hardware included
- Performance grade with a 15.0 inch minimum wheel diameter
Brake fluid and bleeding
Brake fluid carries pressure from the master cylinder to the calipers, so the whole system has to be free of air. After a new kit is installed, the lines should be bled at each caliper, starting with the one farthest from the master cylinder. Air trapped in the circuit makes the pedal feel soft and reduces stopping force. A helper or a pressure bleeder makes the job more consistent.
Brake fluid absorbs moisture over time, which lowers its boiling point. Replace it on a regular schedule and whenever it looks dark or cloudy. Fluid exposed to heat from long descents tends to lose performance sooner. Keep the reservoir sealed during work, and use the fluid type the master cylinder is designed for.
- Bleed the system in order from the farthest caliper
- Inspect brake hoses for rubbing or heat exposure
- Re-check lug nut torque after the first few runs
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261577R |
| UPC | 90127853078 |
| Sold as | Kit |
| Country of origin | USA |
| Caliper | 2 PGC, aluminum 2-piston, floating, red powder coated |
| Rotor diameter | 11.29 inch |
| Rotor thickness | 0.94 inch |
| Rotor type | Vented, 1-piece integral hub |
| Rotor finish | Slotted, drilled and zinc plated |
| Wheel bolt pattern | 5×4.75 |
| Spindle type | Wilwood Mustang II Pro |
| Minimum wheel diameter | 15.0 inch |
| Brake pad | FMSI D0412, ceramic friction |
| Brake hose DOT approved | Yes |
| Hose material | Steel braided |
| Axle | Front |
| Grade | Performance |
| Template | D200A |
| Box count | 2 |
| Wheel stud size | 43832 |
Vehicle fitment
Match the Wilwood Pro Mii spindle type and 5×4.75 bolt pattern on your car before ordering. Fit can vary by wheel style, so compare the D200A template with the wheel you plan to use. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The design calls for a 15/16 inch master cylinder with the proper pedal ratio. On manual brake setups, a 7/8 inch master cylinder gives less pedal effort. A master cylinder larger than 15/16 inch needs too much pedal input to build proper line pressure. Have a qualified technician set up and bleed the system, since brake work is safety critical.
What’s included
Two PGC calipers, rotors on 1-piece integral hubs, premium bearings with races pre-installed, dust caps, dust and weather seals, mounting brackets and all necessary hardware.
Not included: The kit does not include a master cylinder, and it needs a 15/16 inch unit.














