Overview
The Baer Brakes 4262256S is a silver SS4 rear brake system for Ford 8.8 inch C-clip rear ends, paired with a 2.5 inch axle standoff and a four-lug 4×4.25 bolt pattern. Its four-piston S4 caliper works with a 12 inch one-piece slotted, drilled, zinc-plated iron rotor.
The rotor is one piece, rated at a 1.02 rotor thickness, with a minimum wheel diameter of 16.0 inch. A one-piece park brake shoe sits inside the backing plate, and stainless braided hoses come with the kit. Park brake cables and four lug nuts are not included, so they have to come from a separate source.
Key features
- Silver S4 four-piston caliper with a floating design
- One-piece slotted, drilled rotor with zinc plating
- Dual seals against dust, weather and pressure
- Park brake shoe assembly carried in the backing plate
- Hard anodized aluminum pistons with stainless steel abutments
- Stainless braided hoses included
One-piece rotor considerations
A one-piece rotor has no hat to separate, so the rotor and hub surfaces are simpler to clean and inspect. The tradeoff is that the whole rotor must be replaced when the braking surface wears or cracks. Measure thickness at several points and compare it with the minimum marked on the rotor.
Slotted and drilled surfaces help clear gas and debris, but they also create edges that can crack under repeated heat. Light, even pad contact during the first few stops helps the surfaces bed in. Keep the hub face clean and free of rust before mounting the rotor to avoid runout.
- Measure thickness at several points
- Look for heat cracks near slots and holes
- Clean the hub face before mounting
- Bed in new pads with light, even stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262256S |
| UPC | 844165028055 |
| Caliper | S4, four-piston, floating, silver |
| Rotor outside diameter | 12.0 inch |
| Rotor thickness | 1.02 |
| Rotor type | One-piece, vented, iron |
| Rotor surface | Slotted, drilled and zinc plated |
| Lug count | 4 lug |
| Wheel bolt pattern | 4×4.25 |
| Axle flange | Ford 8.8 inch |
| Minimum wheel diameter | 16.0 inch |
| Hose material | Steel braided |
| Park brake | Included |
| Template | S113E |
| Country of origin | US |
Vehicle fitment
It is built for Ford 8.8 inch rear axles with a Ford axle flange, a 2.5 inch axle standoff and a 4×4.25 bolt pattern. Match those measurements to your axle before ordering. Template S113E is the reference for checking wheel clearance.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is one piece, not a two-piece assembly, so the rotor work is simpler. Check the S113E template against wheels of 16 inch or larger before mounting. Test the park brake and pedal after bleeding the hydraulic lines.
What’s included
The set provides the silver S4 caliper, the 12 inch one-piece rotors, the park brake shoe assembly and stainless braided hoses.
Not included: Park brake cables and four lug nuts must come from another source.















