Overview
The Baer Brakes 4262256R is a complete rear disc brake system for Ford 8.8 inch C-clip rear ends with a 2.5 inch axle standoff. It pairs an S4 4-piston caliper with a 12 inch one-piece slotted and drilled rotor in a red finish, and it is set up for a 4 lug, 4 x 4.25 inch bolt pattern.
Baer’s backing plate acts as the caliper mount and also holds the park brake shoe assembly, so the park brake is built into the rear assembly. Stainless braided hoses are included. The system is designed for wheels of 16 inch or larger, and Baer advises checking wheel clearance against its template before ordering.
Key features
- S4 caliper with 4 pistons, hard anodized aluminum pistons and stainless steel abutments
- Floating caliper type with dual dust, weather and pressure seals
- One-piece slotted, drilled and zinc plated rotor, 1.02 inch thick
- DR1-C pad type (FMSI DR1-C)
- Park brake shoe assembly integrated into the backing plate
- DOT approved braided hoses
- Powder coated finish, CNC machined from US sourced forged or billet aluminum
Caring for the rear brakes
Rear disc brakes on a Ford 8.8 inch axle carry more heat than the drum setups many older trucks came with, so the pads, rotor and caliper work as one system. Pad compound affects bite, fade and noise, and the friction material should suit the rotor surface and the driving the vehicle does most. Slotted and drilled rotors help shed gas and water, but some pad compounds wear faster against them.
Before installation, check the backing plate for corrosion, confirm the caliper slides move freely, and inspect the rubber dust boots for cracks. Park brake cables and the shoe adjuster are often serviced at the same time as the rest of the rear assembly, because a stretched cable can leave the park brake working poorly even when the hydraulics are sound. Route rear hoses clear of the axle tube and suspension travel.
- Check pad thickness at every tire rotation
- Replace pads in axle pairs
- Inspect the rotor for heat cracks and grooves
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262256R |
| UPC | 844165028048 |
| Caliper | S4, 4-piston, floating, red |
| Rotor | 12.0 inch outside diameter, 1-piece, vented, slotted and drilled, zinc plated |
| Rotor thickness | 1.02 inch |
| Rotor material | Iron |
| Bolt pattern | 4 x 4.25 inch, 4 lug |
| Axle flange | Ford 8.8 inch |
| Axle standoff | 2.5 inch |
| Minimum wheel diameter | 16.0 inch |
| Brake pad | DR1-C (FMSI) |
| Hoses | Braided, DOT approved |
| Park brake | Shoe assembly included; cables not included |
| Template | S113E |
| Country of origin | US |
Vehicle fitment
It is built for Ford 8.8 inch C-clip rear ends with a 2.5 inch axle standoff. Match the axle flange and bolt pattern on your rear end to the kit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The park brake shoe sits in the backing plate, but park brake cables are not part of the package, so a cable set is needed to operate the park brake. Check the S113E template against the wheel before mounting, since the system needs a 16 inch or larger wheel.
What’s included
The kit includes the S4 caliper, 12 inch rotor, backing plate with park brake shoe assembly and stainless braided hoses.
Not included: park brake cables and lug nuts.















