Overview
Baer Brakes part 4301436B is a black Pro Plus front brake system for the 2006–2009 Chevrolet Trailblazer SS, covering both 2WD and AWD drivetrains. The kit combines a 6P six-piston caliper with a 2-piece slotted and drilled rotor that has a billet aluminum hat, arranged as one front package rather than separate components. It is built for drivers who want a performance front brake upgrade for this Trailblazer.
Each hub arrives assembled, with bearings and races installed and packed with Redline synthetic grease before the kit is boxed. The caliper body is CNC machined from forged or billet aluminum stock, made in Phoenix, AZ, and finished in powder coat. Aftermarket wheel fit can vary, so measure clearance using the Q077P template before mounting.
Key features
- Six-piston 6P caliper with staggered pistons designed to minimize uneven pad wear
- Dual seals guarding against dust, weather and pressure
- Slotted and drilled 2-piece rotor, zinc-plated, with a billet aluminum hat
- Caliper parts CNC machined from forged or billet aluminum
- Stainless steel pistons, abutments and noise suppression clips
- Powder coated black finish
- Hubs pre-assembled with bearings, races and Redline synthetic grease
- Caliper made in Phoenix, AZ
Care and maintenance
A black powder coated caliper keeps its look with simple cleaning. Use a mild soap and water solution and a soft brush on the caliper body, and avoid harsh solvent or abrasive pads that can dull the finish. Brake dust tends to build up on the inside of the wheel, so clean the wheel face and caliper area together during tire rotations to keep the set looking uniform.
Brake performance depends on the rotor and pads working together. Inspect the slotted, drilled rotor for hot spots, heavy scoring or cracks near the holes, and check that the pads seat evenly across the rotor face. The stainless steel pistons and noise suppression clips should move freely when the pads are removed. Replace worn pads as a set on the same axle to keep braking even side to side.
- Clean the caliper with mild soap and water
- Avoid abrasive pads on the powder coat
- Inspect the rotor for cracks near the drilled holes
- Check that the pistons move freely
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301436B |
| UPC | 844165037101 |
| Drive | 2WD and AWD |
| Axle | Front |
| Caliper type | 6-piston (6P) |
| Caliper color | Black |
| Finish | Powder coated |
| Pistons | Stainless steel |
| Rotor diameter | 14 inch |
| Rotor style | Slotted, drilled |
| Rotor construction | 2-piece |
| Rotor material | Iron with aluminum hat |
| Rotor surface | SDZ |
| Wheel bolt pattern | 6×5.00 |
| Minimum wheel diameter | 18.0 inch |
| Front rotor included | Yes |
| Lug nuts included | No |
| Box count | 2 |
| Template | Q077P |
| Country of origin | US |
Vehicle fitment
Fitment for this black kit covers the 2006–2009 Chevrolet Trailblazer SS in both 2WD and AWD drive configurations, as set by the manufacturer. No other vehicles are covered under this part number.
Other Trailblazer generations and non-SS Trailblazer models are not part of this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hubs come assembled, so installation centers on attaching them to the control arms as Baer describes. Compare the Q077P template against your planned wheel, since the minimum wheel diameter is 18.0 inch and wheel fit is not guaranteed. Lug nuts are not included, so have a set that matches the 6×5.00 bolt pattern ready. Brake work is best left to an experienced installer.
What’s included
The black kit includes the front brake system: the 6P caliper, the 2-piece slotted and drilled rotor with billet aluminum hat, and hubs already fitted with bearings, races and Redline synthetic grease. The front rotor is included, and the kit is packed in 2 boxes.
Not included: Lug nuts.













