Overview
The Baer Brakes 4262236R is a red rear brake kit built around a 12 inch S4 caliper and rotor for Ford 9 Inch rear ends with Torino (late big) bearing housing ends. It is listed with a 5×4.50/5×4.75 wheel bolt pattern and a 5 lug count, and it includes a park brake shoe assembly housed in Baer’s backing plate.
The 12 inch S4 fits most 16 inch or larger wheels. Fit with every wheel style cannot be guaranteed, so use the S113E template to compare the system with your chosen wheel before ordering.
Key features
- Four-piston S4 caliper with hard anodized aluminum pistons and stainless steel abutments
- 12.0 inch 1-piece slotted, drilled, zinc plated vented rotor
- Dual seals for dust, weather and pressure, plus noise suppression clips
- Backing plate that serves as the caliper mount and houses a 1-piece park brake shoe assembly
- Braided steel hoses, DOT approved.
- Powder coated finish; components CNC machined from US sourced forged or billet aluminum, made in Phoenix, AZ
Choosing a wheel for big brakes
A 12 inch rear disc kit leaves less room inside the wheel than drum brakes did, so wheel offset and spoke design matter as much as diameter. Before ordering, set the S113E template against the wheel you plan to run and check that the caliper body clears the spokes through the full range of suspension travel.
Rear disc conversions often prompt related changes. Brake hoses, pads and park brake cable routing should be inspected together with the rotor and caliper, since worn cables or cracked hoses can undermine an otherwise correct installation. Re-torque the lug nuts after the first few drives.
- Check wheel clearance with the template before buying
- Inspect park brake cables when replacing the shoe assembly
- Replace hoses that show cracks or bulges
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262236R |
| UPC | 844165029434 |
| Sold as | Kit |
| Caliper | S4, 4 pistons, fixed type |
| Caliper color | Red |
| Rotor outside diameter | 12.0 inch |
| Rotor type and construction | 1-piece, vented |
| Rotor material | Iron |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor thickness | 1.02 |
| Pad FMSI number | DR1-C |
| Brake hose | Steel braided, DOT approved |
| Park brake | Included; park brake cables not included |
| Axle flange | Ford 9 Inch Torino/Late Big Bearing |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 16.0 inch |
| Template | S113E |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
It is built for Ford 9 Inch axles with Torino (late big) bearing housing ends and a 5×4.50/5×4.75 bolt pattern. Those details describe an axle rather than a specific year, make or model, so compare the S113E template against your axle housing before choosing this kit.
An axle name alone does not confirm a vehicle, so match the housing ends to your own axle first. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The park brake shoe assembly sits inside Baer’s backing plate, so the park brake hardware is part of this kit, but park brake cables are not included and must be sourced separately. Braided hoses come with the kit. Check the 16.0 inch minimum wheel diameter and the S113E template against your wheel before mounting. Brake work on a rear axle should be left to someone experienced with disc brake systems.
What’s included
The kit includes the 12.0 inch 1-piece rotor, the S4 four-piston caliper, the backing plate with its park brake shoe assembly, and the braided brake hoses. Pad types DR1 or HB100 are named, so check the package contents against your installation before starting.
Not included: park brake cables, lug nuts, and a front rotor.















