Overview
The Baer Brakes 6920163 is a one-piece, 12-inch tall hat replacement brake rotor for the right side of select Baer Brake systems. It has a plain surface, meaning the friction face has no slots or drilled holes, and it is sold as a single rotor. The part is a vented cast-iron design built around a 5-stud, 4.75-inch bolt circle and a 2.78-inch center hole.
The casting uses a curved vane design to aid cooling. The rotor is dynamic balanced to run smoothly and is built for rotor stability and resistance to distortion. Because it is directional, it is made for one side of the vehicle only, so the right-hand part should not be used on the left. Confirm fit for your vehicle’s year, model and trim before ordering, and match the rotor to your Baer system.
Key features
- Directional right-side design, built for one side only
- Curved vane design intended to improve cooling
- Dynamic balanced for vibration-free performance
- One-piece full-cast construction in a tall hat style
- Plain surface on a vented cast-iron rotor
- Performance grade
Before you buy
A brake rotor works with the caliper, pads and hub, so check that the new rotor matches the rest of the brake system before ordering. Confirm the hub bolt pattern, center bore and hat style against the vehicle or system you are replacing. Plain friction surfaces are common on street and trail setups, but the pad compound should suit the rotor material and the way the vehicle is driven.
Rotors wear over time, and a worn rotor can cause pulsation, noise or reduced stopping performance. Inspect the friction surface for scoring, heat cracks and uneven thickness, and measure thickness against the minimum stamped on the rotor or listed by the vehicle maker. Pads are usually replaced at the same time to keep the pair matched.
- Check the side marking before fitting a directional rotor
- Replace pads and hardware together when rotors are changed
- Bed in new pads after installation to build an even friction layer
- Inspect hub surfaces and clean rust before mounting
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920163 |
| UPC | 844165036265 |
| Country of origin | USA |
| Sold as | Each |
| Axle | Right |
| Construction | Full cast, one piece |
| Brake surface type | Directional |
| Solid or vented | Vented |
| Material | Cast iron |
| Grade type | Performance |
| Surface type | Plain |
| Outside diameter | 12 inches |
| Nominal thickness | 0.81 inch |
| Overall height | 2.224 inch |
| Stud/lug hole circle diameter | 4.75 inch |
| Stud/lug hole quantity | 5 |
| Center hole diameter | 2.78 inch |
| Drum in hat | No |
| ABS tone ring included | No |
| Emission code | 6 |
Vehicle fitment
It is a right-side rotor for select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotor is directional and made for the right side, mount it only in the right-side position and confirm the side before fitting. The ABS tone ring is not included, so if your hub uses a tone ring, it must be supplied separately. Rotors are sold individually, so a pair requires two units.
What’s included
One Baer Brakes 6920163 replacement rotor, right side, one-piece tall hat style with a plain finish. Rotors are sold individually.
Not included: ABS tone ring.
