Overview
The Baer Brakes 6801232 is a 1.750 inch S4 caliper rebuild kit made to service one caliper. It supplies the seals, abutment clips and bleeder caps used in a rebuild of an S4 caliper at that size.
The kit includes 4 weather seals and 4 pressure seals in EPDM rubber, 4 stainless steel pad abutment clips, and 2 bleeder caps. The O-rings have a 1.75 inside diameter and a square rim shape. A bleeder screw is not part of the kit and must be reused or sourced separately.
For help confirming piston size before ordering, Baer’s technical department is available.
Key features
- Rebuilds one Baer S4 caliper in the 1.750 inch size
- 4 weather seals and 4 pressure seals in EPDM rubber
- 4 stainless steel pad abutment clips
- 2 bleeder caps
- O-ring seals with a square rim shape
Caliper rebuild checklist
A good rebuild starts with a clean workspace and a clear order of steps. Lay out each seal, clip and cap as it comes off so nothing is mixed up. Dirty surfaces or a seal pinched during installation can undo the work, so take time at each stage.
Piston and bore condition matter more than the seals alone. Look for rust pitting, scratches and uneven wear on the bore wall. Light surface rust may be cleaned away, but deep marks mean the caliper body should be replaced rather than rebuilt.
Plan for the parts that touch the seals. Worn abutment clips and a tired bleeder screw are common reasons for uneven pad wear or a leak at the bleed point. Replacing them during the rebuild costs little compared with reopening the caliper later.
- Keep parts in order during disassembly
- Clean bores with brake-safe cleaner only
- Replace worn abutment clips with the seals
- Verify the bleeder screw threads before reuse
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801232 |
| UPC | 90127959800 |
| Caliper type | S4 |
| Size | 1.750 inch |
| O-ring inside diameter | 1.75 |
| O-ring material | EPDM rubber |
| O-ring rim shape | Square |
| Seal type | O-ring |
| Weather seals | 4 |
| Pressure seals | 4 |
| Pad abutment clips | 4, stainless steel |
| Bleeder caps | 2 |
| Bleeder screw included | No |
| Coverage | 1 caliper |
| Sold as | Kit |
| Country of origin | USA |
Vehicle fitment
The kit is matched to the S4 caliper at 1.750 inch rather than to a vehicle, so caliper type and piston size decide suitability. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm the caliper type and piston size before ordering, because no vehicle years, models or trims are given for this kit.
Installation notes
Strip and clean the caliper before the new seals and abutment clips are fitted. A bleeder screw is not included, so reuse the one you have or fit a replacement. Bleed the system after reassembly and check the pedal before the vehicle is driven.
What’s included
4 weather seals, 4 pressure seals, 4 abutment clips and 2 bleeder caps, for one S4 caliper.
Not included: bleeder screw.












