Overview
The Baer Brakes 4302341B is a complete rear disc brake kit for GM small pattern 10/12 bolt rear ends with bearing on axle, flush mount housing ends and a 5×4.75 or 5×5 inch bolt circle. It is built around a one-piece monoblock six-piston caliper and a 14 inch two-piece slotted, drilled rotor.
Baer’s backing plate serves as the caliper mount and also houses a one-piece park brake shoe assembly, so the parking brake is integrated into the rear system. The rotors arrive pre-assembled with NAS high grade stainless hardware, and braided hoses with hardware are included. The 14 inch Extreme Plus suits most wheels 18 inch or larger, but wheel style fit is not guaranteed for every wheel, so check the N110P template against your wheels before mounting.
Key features
- One-piece monoblock, six-piston, 6S caliper, powder coated and finished in black
- CNC machined from US-sourced 2618 aluminum forging
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to minimize uneven pad wear
- Dual seals guard against dust, weather and pressure
- Two-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Integrated one-piece park brake shoe assembly inside the backing plate
Before you buy
A rear disc kit like this one changes more than stopping force at the wheel. The parking brake is part of the rear system here, so the shoes, adjustment and cable routing should be checked together. Pad and rotor wear depend on how the vehicle is driven, so inspect them on a schedule rather than waiting for noise.
Heavier axles and larger tires add load to the caliper and rotor, so it helps to think about the whole rear setup before choosing a kit. Bearing condition and housing end wear matter too, since the housing ends carry the rotor. Re-check hardware torque after the first few trail runs.
- Inspect pad thickness and rotor surface at each service
- Check the park brake shoes for wear and proper adjustment
- Look for leaks at the braided hoses and caliper fittings
- Re-check wheel clearance if tire size changes
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302341B |
| UPC | 844165043867 |
| Wheel bolt pattern | 5×4.75 / 5×5.00 inch |
| Lug count | 5 lug |
| Axle flange | GM small pattern 10/12 bolt, flush mount bearing |
| Caliper | One-piece monoblock, 6-piston, 6S, fixed, black |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.25 |
| Rotor type | 2-piece, vented, slotted and drilled, zinc plated |
| Rotor hat material | Aluminum |
| Brake pad FMSI number | D1247 |
| Template | N110P |
| Minimum wheel diameter | 18.0 inch |
| Park brake | Included |
| Country of origin | US |
Vehicle fitment
The kit is built for GM small pattern 10/12 bolt rear axles with flush mount bearing housing ends and a 5×4.75 or 5×5 inch bolt circle. Match those dimensions to your axle before ordering. Confirm fit for your vehicle’s year, model and trim before ordering.
Check your axle housing flange and bolt pattern against the specifications above, since rear axle flange styles other than GM small pattern flush mount are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotors come pre-assembled with stainless hardware, so confirm wheel clearance against template N110P before mounting, because the minimum wheel diameter is 18.0 inch. Brake work is safety critical: bleed the hydraulic system after connecting the braided hoses and test pedal firmness before driving.
What’s included
The kit covers the one-piece monoblock six-piston caliper, the 14 inch two-piece rotors with pre-assembled hardware, the backing plate with park brake shoe assembly, and stainless braided hoses with hardware.
Not included: Lug nuts and park brake cables are not supplied, and the front rotor is outside this kit.















