Overview
The Baer Brakes Pro Plus 14.0 inch rear brake kit, part number 4262152HO, is a rear disc brake package finished in Hugger Orange. It is designed for the Ford 9 inch Torino (late big) bearing housing and pairs 6-piston fixed calipers with 14.0 inch two-piece slotted, drilled rotors and D0731 pads.
The backing plate doubles as the caliper mount and houses a one-piece park brake shoe. The rotors arrive pre-assembled with stainless hardware. Most 18 inch and larger wheels clear without spacers. Compare the axle flange and wheel before installing.
Key features
- 14.0 inch two-piece rotor with a slotted, drilled, zinc-plated surface and billet aluminum hat
- Vented rotor construction paired with NAS high grade stainless hardware
- Six-piston calipers in a powder coated Hugger Orange finish
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to minimize uneven pad wear
- Dual seals that protect against dust, weather and pressure
- Calipers manufactured in Phoenix, AZ, from forged or billet aluminum sourced in the US
Before you buy
Rear disc conversions change more than the brakes themselves. The axle flange, bearing housing, wheel bolt pattern and wheel clearance all need to match before the rotors and calipers go on. Measuring the existing setup and comparing it with the axle and wheel details for this kit helps avoid returning a kit that will not seat or clear.
Plan for the parking brake and hydraulic side as a whole. Park brake cables are not included with this kit, so measure the routing and confirm cable length before removing the old setup. Brake fluid should be fresh, and the system should be bled after the hoses are fitted. Check rotor surfaces for heat cracks or deep grooves during routine service.
- Wheel clearance checked against the caliper and rotor hat
- Park brake cable routing measured before ordering
- Brake fluid replaced and the system bled after refilling
- Rotor and pad wear checked at each brake service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262152HO |
| UPC | 90127950197 |
| Package type | Kit |
| Caliper | 6-piston (6P), fixed |
| Caliper color | Hugger Orange, powder coated |
| Rotor outside diameter (rear) | 14.0 inch |
| Rotor type | 2-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor thickness | 1.15 |
| Rotor hat | Billet aluminum |
| Pad FMSI number | D0731 |
| Axle | Rear |
| Axle flange | Ford 9 Inch Torino/Late Big Bearing |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 18.0 inch |
| Brake hose | Steel braided, DOT approved |
| Park brake | Included; park brake cables not included |
| Template | Q082P |
| Grade type | Performance |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
The kit is sized for the Ford 9 inch Torino (late big) bearing housing, an axle flange rather than a vehicle. Confirm fit for your vehicle’s year, model and trim before ordering. The Q082P template can be used to check wheel clearance.
Installation notes
Use template Q082P and compare it with the wheel you plan to run, since Baer cannot guarantee wheel fit for every style. The minimum wheel diameter is 18.0 inch. Park brake cables are not included, so plan for them separately. Rear brake work calls for experience with disc systems, so work methodically.
What’s included
The kit includes the 6P calipers, the 14.0 inch two-piece rotors pre-assembled with NAS high grade stainless hardware, the backing plate with its one-piece park brake shoe, and the stainless braided hoses with mounting hardware.
Not included: Park brake cables.
