Overview
The Baer Brakes Pro Plus 14.0 inch front brake kit, part number 4261217R, is a red six-piston front disc brake system for Ford and Mercury cars from 1970 to 1974 that were equipped with OE drum-brake spindles. It uses a 14.0 inch two-piece slotted and drilled rotor with a billet aluminum hat, clamped by a fixed six-piston caliper. Baer manufactures the kit in Phoenix, Az.
The 14 inch Pro Plus is designed for most 18 inch or larger wheels, but Baer cannot guarantee fit with every wheel style, so check clearance with the Q082P template against the wheel you plan to use.
Key features
- Six-piston, 6P fixed caliper in red with stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- Two-piece slotted, drilled, zinc-plated rotor on a billet aluminum hat
- Billet aluminum hubs with premium bearings packed in Redline synthetic grease and billet dust caps
- CNC machined from US-sourced forged or billet aluminum with a powder coated finish
Pad selection and bedding
Pad compound controls how a brake system behaves when hot. Street pads tend to be quieter and less aggressive when cold, while harder compounds hold up better under repeated heavy stops but may need more heat to bite. Choosing pads that match how the car is driven matters more than matching a brand name, and the pad number should be checked against the caliper and rotor before ordering.
Bedding in new pads and rotors transfers an even layer of friction material onto the rotor surface. This is done with a series of moderate stops from speed, followed by a cool-down period. Skipping this step can cause vibration, uneven braking and noise. A two-piece rotor with an aluminum hat expands differently from solid iron, so allow the assembly to cool fully between sessions.
- Torque rotor retaining hardware to the vehicle’s specification
- Avoid holding the pedal at a stop while pads are still hot
- Inspect rotor hat fasteners after the first drives
- Check pad thickness at each service interval
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261217R |
| UPC | 844165040675 |
| Form | Kit |
| Axle | Front |
| Caliper | 6-piston (6P), fixed, red |
| Disc brake pad FMSI number | D0731 |
| Rotor diameter | 14.0 inch |
| Rotor type | 2-piece, vented, slotted and drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.15 |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50 inch |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Minimum wheel diameter | 18.0 inch |
| Brake hose | Steel braided, DOT approved |
| Template | Q082P |
| Lug nuts included | No |
| Emission code | 6 |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
Covered models include 1970 Ford Fairlane, 1970 Ford Falcon, 1970-1974 Ford Maverick, 1970-1973 Ford Mustang, 1970-1971 Ford Torino, 1971-1974 Mercury Comet, 1970-1973 Mercury Cougar, 1970 Mercury Cyclone and 1970-1971 Mercury Montego, all with OE drum-brake spindles.
Mustangs from 1974, Comets from 1970, and Torinos or Montegos from a model year after 1971 fall outside the list above. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotors come pre-assembled with NAS high grade stainless hardware, and the billet hubs have premium bearings already packed with Redline synthetic grease. Mounting brackets and stainless braided hoses are included, so you will need your own lug nuts. Test the Q082P template against your wheel before mounting, since clearance depends on the wheel style.
What’s included
Two-piece 14.0 inch front rotors pre-assembled with NAS high grade stainless hardware, billet aluminum hubs with premium bearings and billet dust caps, six-piston red calipers, all mounting brackets, stainless braided hoses and hardware.
Not included: Lug nuts.














