Overview
The Baer Brakes 4262181S is a silver Pro Plus 14.0 inch rear disc brake system with a six-piston fixed caliper, built for Ford 8 inch/9 inch small bearing rear housing ends on a 5×5.00 bolt pattern. Fit is matched by axle flange rather than by vehicle year, make or model.
The backing plate mounts the caliper and holds a one-piece park brake shoe assembly. The two-piece rotor comes pre-assembled with NAS high grade stainless hardware, and stainless braided hoses with hardware are included. The 14 inch Pro Plus fits most wheels 18 inch or larger, and fit with every wheel is not guaranteed.
Key features
- Six-piston (6P) fixed caliper in silver
- Staggered pistons intended to minimize uneven pad wear
- Stainless steel pistons, abutments and noise suppression clips
- Dual seals for dust, weather and pressure
- Slotted, drilled, zinc-plated 14.0 inch two-piece rotor with aluminum hat
- CNC machined from forged or billet aluminum with a powder coated finish
- Stainless braided hoses, DOT approved
Matching axle flange and wheel size
Axle flange type decides whether a rear brake kit can be bolted on at all. Small bearing and big bearing housing ends differ in hub and bearing arrangement, so the flange should be identified on the axle itself before ordering. Measure the bolt pattern and look for the axle markings rather than relying on the year or model of the truck.
Wheel diameter sets the rotor size that can be run. Larger rotors need more inner wheel clearance, and some spoke or barrel designs leave little room. Checking the wheel against the template before assembly saves time and avoids rubbing once the vehicle is on the road.
- Identify the axle flange before ordering
- Check the bolt pattern on the hub
- Confirm inner wheel clearance with the template
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262181S |
| UPC | 844165036937 |
| Caliper | 6-piston (6P), fixed, silver |
| Rotor type | 2-piece, slotted and drilled, vented |
| Rotor material | Iron with aluminum hat |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.15 |
| Minimum wheel diameter | 18.0 inch |
| Wheel bolt pattern | 5×5.00 (5 lug) |
| Axle flange | Ford 8 inch/9 inch small bearing |
| Pad FMSI number | D0731 |
| Template | Q082P |
| Hose material | Steel braided, DOT approved |
| Emission code | 6 |
| Grade | Performance |
| Park brake | Included; park brake cables not included |
| Sold as | Kit |
| Country of origin | US |
Vehicle fitment
No vehicle years, makes or models are listed. The fitment shown is by axle flange: Ford 8 inch/9 inch small bearing with a 5×5.00 bolt pattern. Check your rear housing against those specifications, then compare template Q082P with the wheel you intend to run.
Big bearing 9 inch housing ends are a different flange type and are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors are pre-assembled with stainless hardware. The park brake shoe is part of the backing plate assembly, and park brake cables are not included. Lug nuts are also not included. Brake systems are safety-critical, so have a qualified technician check the installation.
What’s included
The silver six-piston caliper, the backing plate with its one-piece park brake shoe assembly, the pre-assembled two-piece 14.0 inch rotor, and stainless braided hoses with hardware.
Not included: park brake cables, lug nuts and the front rotor.















