Overview
Part number 4301356B is the black-finish version of Baer Brakes’ Pro Plus 14.0 inch front brake system for the 1991 to 1993 GMC Syclone and Typhoon. Shoppers searching for a 14-inch front disc brake kit for these trucks will find a six-piston caliper, a two-piece slotted and drilled rotor, and spindles and hubs in one set.
Baer describes its Pro Plus systems as complete, detail-oriented performance brake solutions. The black powder coated finish separates this part number from the red 14-inch version of the same kit, while the mechanical content is the same.
Key features
- 6P six-piston caliper using stainless steel pistons, abutments and noise suppression clips
- Staggered pistons aimed at even pad wear
- Dual seals for dust, weather and pressure
- Two-piece zinc-plated rotor, slotted and drilled, with a billet aluminum hat
- Components CNC machined from US-sourced forged or billet aluminum
- Black powder coat finish
- Hubs and bearings assembled with Redline synthetic grease before packing
- Built in Phoenix, Arizona
Wheel clearance and wear checks
Brake upgrades on older trucks often reach beyond the rotor and caliper. Hubs, bearings and steering components wear at different rates, so inspect the wheel bearings, control arm bushings and ball joints before fitting a new brake kit. A kit that arrives with hubs already assembled saves time, but the surrounding parts still need to be sound. Check wheel studs for thread damage and replace any that spin or look stretched.
Choosing wheels is the other half of the job. Wheel offset and backspacing change how the caliper sits in the wheel opening, so clearance should be confirmed with a template before the truck leaves the shop. Pad material, brake fluid and the master cylinder matter too, since a larger rotor paired with a worn master cylinder can feel soft under load.
- Torque lug nuts in a star pattern after the first drive
- Re-check caliper bolts after the first few drives
- Bleed the system fully after any line is disconnected
- Replace brake fluid on a regular service schedule
- Keep the rotor surface free of grease and oil before final assembly
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301356B |
| UPC | 844165046479 |
| Kit type | Kit |
| Axle | Front |
| Rotor diameter | 14 inch |
| Rotor construction | 2-piece |
| Rotor style | Slotted, drilled |
| Rotor material | Iron with aluminum hat |
| Rotor surface | SDZ |
| Front rotor included | Yes |
| Caliper | 6-piston (6P) |
| Caliper color | Black |
| Caliper pistons | Stainless steel, staggered |
| Finish | Powder coated |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 18.0 inch |
| Template | QO82P |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
The listed fitment covers the 1991 GMC Syclone and the 1992 to 1993 GMC Typhoon.
Trucks outside these two models and years, including other GMC or Chevrolet generations, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Hubs come with bearings and races installed, so mounting is a bolt-on job to the control arms. Lug nuts are supplied separately and must match the 5×4.50/5×4.75 pattern. Fit can vary with wheel style, so test the QO82P template against your intended wheel first. Because brakes are safety-critical, a qualified technician should inspect the completed installation before the truck is driven.
What’s included
The kit includes the 14-inch front rotor, six-piston caliper, and spindles and hubs as part of the set.
Not included: Lug nuts.













