Overview
The Baer Brakes Pro Plus 4262181B is the black finish of the 14.0 inch rear brake kit for Ford 8 Inch/9 Inch small bearing rear axle housing ends with a 5×5.00 inch wheel bolt pattern. The package uses a six-piston fixed caliper with a two-piece slotted and drilled rotor, and it suits wheels of 18 inches or larger.
The backing plate acts as the caliper mount and holds a one-piece park brake shoe assembly, keeping the parking brake inside the rear hardware. The D0731 pad type applies, and the Q082P template is the check for wheel clearance against the rotor. Fit with every wheel style is not guaranteed.
Key features
- Black six-piston (6P) fixed rear caliper with powder-coated finish
- Two-piece 14.0 inch slotted, drilled and zinc-plated rotor with billet aluminum hat
- Stainless steel pistons and noise suppression clips
- Staggered pistons intended to reduce uneven pad wear
- Dual seals for dust, weather and pressure
- Park brake shoe assembly housed in the backing plate
- Steel braided hoses with DOT approval and stainless hardware.
Choosing pads and rotor care
Pad choice depends on how the vehicle is used. Street pads suit daily driving and lower heat, while a harder compound can handle repeated braking on steep grades or longer off road runs. A pad that runs too hot can glaze the rotor, so match the compound to the expected load.
Rotor surfaces should be inspected on every pad change. Slots and drilled holes help shed gas and debris, but they also create more places where cracks can start. Look for heat marks, a raised lip at the outer edge, and uneven thickness. Replace the rotor when those signs appear.
- Match pad compound to driving style
- Inspect the rotor for cracks and heat marks
- Clean slots and holes after muddy use
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262181B |
| UPC | 844165036890 |
| Sold as | Kit |
| Caliper | Six-piston (6P) fixed, black |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.15 |
| Rotor type | Two-piece, vented |
| Rotor material | Iron with aluminum hat |
| Surface | Slotted, drilled and zinc plated |
| Wheel bolt pattern | 5×5.00 inch, 5 lug |
| Minimum wheel diameter | 18.0 inch |
| Axle flange | Ford 8 Inch/9 Inch small bearing |
| Brake pad FMSI number | D0731 |
| Hose material | Steel braided, DOT approved |
| Template | Q082P |
| Park brake | Included in backing plate (one-piece shoe assembly) |
| Country of origin | US |
Vehicle fitment
Fitment is matched by the axle flange and bolt pattern: Ford 8 Inch/9 Inch small bearing housing ends with 5×5.00 inch bolts.
Measure your axle flange against the small bearing description before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front rotor, lug nuts and park brake cables are outside this package and must be obtained separately. The 14.0 inch rotor calls for a wheel of at least 18.0 inch minimum diameter, so run the Q082P template against the wheel before the rear is assembled. Hydraulic brake work on the rear axle is best handled by an experienced installer.
What’s included
The package covers the 14.0 inch rear rotor, the six-piston caliper, the backing plate with its park brake shoe assembly, and stainless braided hoses with the stainless hardware used on the rotor.
Not included: front rotor, lug nuts and park brake cables.















