Overview
The Baer Brakes 4262149R is a red Pro Plus 13.0 inch rear brake system for Ford 9 inch rear ends with Torino (late big) bearing housing ends. It pairs a 6-piston, 6P fixed caliper with a 13.0 inch, two-piece slotted and drilled rotor, and it is set up for a 5×4.50 or 5×4.75 wheel bolt pattern.
The backing plate serves as the caliper mount and houses a one-piece park brake shoe assembly, so the parking brake is built into the rear assembly. Rotors arrive pre-assembled with NAS high grade stainless hardware. The kit is for wheels 17 inch and larger, and the Q082H template helps compare clearance with the wheel you plan to run.
Key features
- 6-piston, 6P fixed rear caliper finished in red
- 13.0 inch two-piece rotor, slotted, drilled and zinc plated
- Billet aluminum hat on the rotor assembly
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to reduce uneven pad wear
- Dual seals guarding against dust, weather and pressure
- Powder coated finish
- Braided brake hoses with DOT approval
Setting up the park brake
Because the park brake shoe lives inside the backing plate, the parking function is tied to the rear brake assembly rather than a separate drum. Setting it up involves choosing cables that match the lever and routing, then adjusting the shoe so the lever engages at a sensible point of travel.
Once the system is running, test the park brake on a slope before relying on it. A lever that travels too far or fails to hold usually points to adjustment or cable length, not the rotor. Recheck the hold after the first few trips, as new linings settle in.
- Choose cables that match the lever
- Adjust shoe clearance before testing on a slope
- Recheck hold after the first few trips
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262149R |
| UPC | 844165036289 |
| Caliper | 6-piston (6P), fixed, red |
| Rotor diameter | 13.0 inch |
| Rotor type | 2-piece, slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.1 |
| Pad type (FMSI) | D0731 |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 17.0 inch |
| Axle flange | Ford 9 inch Torino/Late Big bearing |
| Brake hose | Steel braided, DOT approved |
| Park brake | Included |
| Template | Q082H |
| Grade | Performance |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
The kit is built for Ford 9 inch rear axles with Torino (late big) bearing housing ends. Confirm your axle flange style, the 5×4.50 or 5×4.75 bolt pattern and the 17 inch minimum wheel size against your vehicle before ordering, since a 9 inch housing with a different flange may not match.
Confirm the axle flange style, the 5×4.50 or 5×4.75 bolt pattern and the 17 inch minimum wheel size against your vehicle before ordering; a 9 inch housing with a different flange may not match.
Installation notes
The park brake shoe assembly sits inside the backing plate, so test the park brake after the system is installed. Park brake cables are not included, so plan to supply them separately. Brake work on a rear axle should be finished and tested before the vehicle is driven on the road.
What’s included
The kit includes the 6-piston caliper system, the 13.0 inch rotor pre-assembled with stainless hardware, the backing plate with its one-piece park brake shoe assembly, and the braided hoses with hardware.
Park brake cables, lug nuts and the front rotor must be supplied separately.















