Overview
The Baer Brakes 4262151R is a Pro Plus 14.0 inch rear brake kit for Ford 9 inch rear ends with early big bearing housing ends, finished with red calipers. It uses six-piston 6P fixed calipers on two-piece slotted, drilled rotors, and is laid out for five lugs on a 5×4.50/5×4.75 pattern. It fits owners who need a larger rear brake package on an axle with this flange style.
Baer designed the rear backing plate to mount the caliper while housing a one-piece park brake shoe, so both functions share one assembly. The rotors are pre-assembled with NAS high grade stainless hardware. Baer’s own wording points to good heat control and a consistent pedal feel, and the kit has no published make, model or year list.
Key features
- Red 6P six-piston fixed caliper with stainless pistons and abutments.
- Staggered piston arrangement intended to reduce uneven pad wear.
- Dual seals for dust, weather and pressure.
- Two-piece rotor, 14.0 inch, slotted, drilled and zinc plated, with a billet aluminum hat.
- Caliper body CNC machined from US sourced forged or billet aluminum.
- Powder coated finish throughout.
- Stainless braided hoses with mounting hardware included.
Wheel clearance and setup
Wheel clearance is the first check on any larger rear brake package. The rotor and caliper take up more room than stock hardware, so the inside face of the wheel and the caliper body both need clearance before the tire is mounted. Use a template or a test fit with the wheel off the vehicle, and look at the offset as well as the diameter. Tire width matters too, since a wider tire can rub the caliper at full steering lock.
Red calipers stand out behind the wheel, so keep the finish clean and inspect the coating after the first few heat cycles for any chips that could let moisture reach the metal. Uneven pad wear on one side often points to a sticking slide or a seized piston, which is worth fixing before it leads to rotor damage. Check the brake lines and fittings at each service.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262151R |
| UPC | 844165036333 |
| Sold as | Kit |
| Caliper | 6P six-piston fixed, red |
| Caliper body | CNC machined aluminum (forged or billet), powder coated |
| Rotor outside diameter | 14.0 inch |
| Rotor construction | 2-piece, vented |
| Rotor surface | Slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.15 |
| Pad FMSI number | D0731 |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 18.0 inch |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Park brake shoe | Included (1-piece) |
| Park brake cables | Not included |
| Hose material | Steel braided, DOT approved |
| Front rotor | Not included |
| Lug nuts | Not included |
| Emission code | 6 |
| Grade | Performance |
| Template | Q082P |
| Country of origin | US |
Vehicle fitment
It is built for Ford 9 inch rear axles with early big bearing housing ends and a 5×4.50/5×4.75 wheel pattern with 5 lugs. Wheel fit cannot be guaranteed for every style, so use the Q082P template to test your wheel before mounting.
The Torino (late big) and small bearing Ford 9 inch housings are different flange types and are not covered here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables are not included, so the rear parking brake will need cables sourced separately. Stainless braided hoses and hardware are supplied, but lug nuts and the front rotor are not. Check wheel clearance with the template before mounting, and have a qualified installer handle the rear brake work.
What’s included
The kit includes the 14.0 inch two-piece rotors, red six-piston calipers, the one-piece park brake shoe in the backing plate, stainless braided hoses and mounting hardware.
Not included: park brake cables, lug nuts and the front rotor.















