Overview
The Baer Brakes 4262263R is a red 13-inch two-piece rear disc brake kit built on the SS4 Plus four-piston caliper, designed for Ford 9 Inch rear ends that use Torino (Late Big) bearing housing ends. Its slotted, drilled rotor is drilled for 5×4.50 and 5×4.75 wheel patterns.
A one-piece park brake shoe assembly sits inside the backing plate, which also serves as the caliper mount. The kit is meant for wheels 17 inches and larger, and the rotor ships with NAS high grade stainless hardware already fitted.
Key features
- Red four-piston S4 caliper with fixed design
- 13.0 inch two-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- NAS high grade stainless hardware pre-assembled on the rotor
- Backing plate housing a one-piece park brake shoe assembly
- Hard anodized aluminum pistons, stainless steel abutments, noise suppression clips
- Dual seals for dust, weather and pressure
- Stainless steel braided hoses, DOT approved
- Pads: DR1-C (FMSI DR1-C)
Red finish and daily use
The red caliper finish is a painted surface, so it benefits from the same care as any caliper. Road salt, grit and brake dust collect around the piston area and the mounting hardware, and a periodic rinse keeps the surface presentable. Check the caliper seals and boots during service, since dirt trapped near them is a common cause of sticking.
Pad selection is part of the system, so the pad type used here should stay matched to the rotor. Sudden changes in compound can change friction and heat, which shows up as noise or uneven braking. Replace pads in matched sets and bed them in gently before heavy use.
- Rinse away brake dust and road salt regularly
- Inspect caliper seals and boots during service
- Replace pads as matched sets on the same axle
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262263R |
| UPC | 844165028529 |
| Sold as | Kit |
| Caliper | S4 Plus, four-piston, fixed |
| Caliper color | Red |
| Rotor outside diameter | 13.0 inch |
| Rotor type | Two-piece, slotted, drilled, zinc plated |
| Rotor construction | Vented |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 0.81 |
| Pad type | DR1-C (FMSI DR1-C) |
| Park brake | Included, one-piece shoe assembly |
| Brake hose | Stainless steel braided, DOT approved |
| Axle flange | Ford 9 Inch Torino / Late Big bearing |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 17.0 inch |
| Template | S135H |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
It is designed for Ford 9 Inch rear ends with Torino (Late Big) bearing housing ends and both 5×4.50 and 5×4.75 wheel patterns. Match the axle flange to your rear end before ordering.
Wheel fit varies by style, so use template S135H against your wheel. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The park brake shoe assembly is part of the backing plate, so the parking function is set when the plate is mounted. Park brake cables are not supplied and must be run before the parking brake will engage. Bleed the brake lines after connecting the stainless braided hoses.
What’s included
The kit includes the red S4 Plus caliper, the 13-inch two-piece rotor with aluminum hat and stainless hardware, the backing plate with its park brake shoe assembly, and stainless braided hoses.
Not included: park brake cables and lug nuts, which need separate sourcing.















