Overview
The Baer Brakes 53010-0981 is a rear rotor and pad combo kit for the Jeep Wrangler TJ and LJ, with the manufacturer list covering the 1997–2006 Wrangler (TJ) and 2004–2006 Wrangler (LJ). The title specifies Wranglers equipped with OE rear disc brakes, which is the setup this direct replacement kit is designed around.
Each kit contains a pair of slotted, drilled and zinc-plated cast iron rear rotors, a set of ceramic performance street pads and stainless-steel abutment and noise suppression hardware. The rotors are one-piece full-cast units with a directional braking surface, suited to owners who want stronger stopping, a finished look and comfortable daily driving.
Key features
- Slotted, drilled and zinc-plated cast iron rear rotors
- Ceramic performance street pads for everyday road use
- Stainless-steel abutment and noise suppression hardware included
- Directional braking surface on a one-piece full-cast rotor
- Direct bolt-on replacement with no modifications needed.
- Positioned by Baer as a balance between performance and road-going comfort
Rear brake care on a Wrangler
Rear brakes on a Wrangler handle less braking load than the front, but they still need regular inspection. Rear rotors can develop surface rust if the vehicle sits for long periods, and light rust usually clears after a few stops. Check the rear pads and rotors whenever the wheels come off for a tire rotation.
Choosing a rear kit means matching the rotor to the axle and the existing brake setup. Before any new parts go on, inspect the rear caliper, hub and parking brake arrangement. Rear parts are often replaced as a complete set so that braking stays balanced from side to side.
- Look for scoring, cracks or a raised lip on the rotor face
- Confirm the parking brake still holds after the job
- Check the caliper slide pins for free movement
- Replace worn hardware clips along with the pads
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 53010-0981 |
| UPC | 844165053057 |
| Axle | Rear |
| Construction | One piece, full cast |
| Material | Cast iron |
| Surface type | Slotted, drilled and zinc plated |
| Brake surface | Directional |
| Friction material | Ceramic |
| Grade type | Premium |
| Emission code | 6 |
| Abutment clips included | Yes |
| Brake lubricant included | No |
| Sold as | Kit |
| Country of origin | USA |
Vehicle fitment
The manufacturer fitment list covers the 1997–2006 Jeep Wrangler (TJ) and the 2004–2006 Jeep Wrangler (LJ) for this rear kit.
It is designed for Wranglers with OE rear disc brakes, so check your rear brake setup. Fitment does not extend to the 2007–2018 Wrangler (JK) or the JL generation. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Abutment clips are included with the stainless-steel hardware. Brake lubricant is not included, so a separate lubricant is needed. Because this is a rear brake job, have a qualified technician verify the finished installation before the vehicle is driven.
What’s included
- A pair of slotted, drilled and zinc-plated cast iron rear rotors
- A set of Baer Claw ceramic performance street pads
- Stainless-steel abutment and noise suppression hardware with abutment clips
Not included: brake lubricant.
