Overview
The Baer Brakes Claw front brake pad, part number D2382, is a semi-metallic replacement set for several Ford F-150 variants and related Ford and Lincoln front applications. It is sold as a set of four pads and includes abutment clips and pad shims.
The fitment covers the F-150 Lightning, F-150 Raptor, F-150 SSV and F-150 Police Responder, along with the Bronco Raptor, Expedition Max SSV and SSV, and the 2022–2024 Lincoln Navigator. The Claw line works as an OE replacement option for these applications. Off-road, mud and grit can work into the caliper and the pad surface, so clean the caliper area during every pad change.
Key features
- Semi-metallic friction material with a premium grade type.
- Slotted pads with abutment clips and pad shims included.
- Stainless steel abutment hardware is included with most applications.
- Four pads per set, for the front axle.
- Baer lists consistent wear and performance as core design goals.
- No pad wear sensor and no attached wear indicator in this set.
Front pads and heavy loads
On a truck, the front brakes handle most of the stopping, especially when the vehicle is loaded or towing. Semi-metallic pads hold up well to that heat, but they need enough warm-up before they bite fully. Plan extra distance when braking from highway speeds on steep grades.
Off-road use adds mud and grit to the caliper and pad faces. Clean the caliper area and check the pad surface during each change. When the pads are replaced, the rotors should be inspected for thickness, runout and heat marks, since a worn rotor can cause pulsation and shorten the life of the new pads.
- Clean caliper and bracket after muddy trips
- Check rotor runout before refitting
- Bed in new pads with moderate stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | D2382 |
| FMSI number | D2383 |
| UPC | 90127866306 |
| Sold as | Set |
| Pads per set | 4 |
| Friction material | Semi-metallic |
| Grade type | Premium |
| Axle | Front |
| Backing plate color | Black |
| Slotted | Yes |
| Pad shims included | Yes |
| Abutment clips included | Yes |
| Mounting hardware included | No |
| Brake lubricant included | No |
| Pad wear sensor included | No |
| Wear indicator attached | No |
| Rotor qualifier | Rear rotor diameter 336 mm or 350 mm, on the F-150 Raptor SSV Police Responder |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
This set covers the 2022–2026 Ford Bronco (Raptor), the 2022–2024 Ford Expedition (Max SSV, SSV), the 2021–2026 Ford F-150 (Police Responder, Raptor, SSV), the 2022–2026 Ford F-150 Lightning and the 2022–2024 Lincoln Navigator. The F-150 Police Responder entry is qualified by rear rotor diameter, 336 mm or 350 mm, and by RWD or 4WD drive.
Measure the rear rotor and compare it with the qualifier before fitting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because one F-150 entry depends on rear rotor diameter, check that measurement before the job starts. Front brakes do most of the stopping on a truck, so have the installation inspected by a qualified brake technician. Bed in the new pads with a few moderate stops to restore full braking.
What’s included
Four front brake pads, abutment clips and pad shims.
Not included: mounting hardware, brake lubricant and a pad wear sensor.












