Overview
The Baer Brakes 6070013 is a set of four ceramic street brake pads for select Baer S4 calipers. The pads use a performance ceramic compound, the same type Baer fits as standard in its Big Brake Kits, and are designed to give good initial bite and consistent stopping at low to moderate operating temperatures.
The pads suit daily driving, weekend use and mild track use, and they are not intended for extreme use conditions. They fit the Jeep JK rear position and the Jeep JK SS4 or S55 Deep Stage System series, as covered in the section below.
Key features
- Performance ceramic friction compound
- Smooth, dependable stopping power in light to moderate conditions
- Low noise and low dust levels.
- Slotted pads, premium grade, sold in axle sets
- Four pads per set
- Caliper hardware sold separately
Choosing pads for your setup
Brake pads are the friction surface that squeezes the rotor to slow the wheel, and ceramic compounds are built to hold steady stopping at normal operating temperatures. Ceramic pads generally produce less dust than semi-metallic pads, which helps keep wheels cleaner. Friction is best once the pads are fully bedded in, so after installation make a series of moderate stops to transfer an even layer of material onto the rotor before any heavy braking.
Pads wear together with the rotor, so the two are best inspected at the same time. Look at the rotor face for scoring, blue heat marks or uneven thickness, and clean the caliper bracket and slide pins while the pads are out. Apply brake lubricant only where pad contact points need it, and keep it off the friction surface. Replace pads before the backing plate reaches the rotor, since metal contact can damage the rotor quickly.
- Bed in new pads with a series of moderate stops
- Inspect rotors for scoring and uneven thickness
- Clean and lubricate abutment contact points
- Replace pads before the backing plate touches the rotor
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6070013 |
| UPC | 90127964583 |
| Series | S4 |
| Caliper type | S4 |
| Compatible calipers | Certain S4, 4-piston |
| Pads per set | 4 |
| Pad type | Street |
| Friction material | Ceramic |
| Grade type | Premium |
| Slotted | Yes |
| Backing plate color | Black |
| Box count | 1 |
| Abutment clips included | No |
| Bolts included | No |
| Mounting hardware included | No |
| Pad shims included | No |
| Pad wear sensor included | No |
| Brake lubricant included | No |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) in the rear position.
It is not a fit for the Wrangler TJ, LJ or JL, or the Gladiator (JT). Confirm fit for your vehicle’s year, model and trim before ordering, and check axle position as well.
Installation notes
Abutment clips and noise suppression hardware are sold separately, and the set does not include bolts, mounting hardware, pad shims or brake lubricant. Check your caliper hardware before starting. Brake pads affect stopping performance, so have them installed by someone experienced with disc brake service.
What’s included
Four brake pads per set, with a black backing plate. Box count is one.
Not included: abutment clips, bolts, mounting hardware, pad shims, pad wear sensor, brake lubricant and caliper hardware (8 pad abutments).
