Overview
The Baer Brakes D2216 is a front Claw ceramic brake pad set of 4 for the 2021–2024 Ford Bronco, excluding Raptor models, and for the 2019–2021 Ford Ranger. Baer presents it as an OE replacement pad that delivers consistent wear with minimal noise and dust.
The ceramic compound is designed for long pad life and low rotor wear, and it balances performance with road-going comfort for a daily-driven vehicle. The set comes with abutment clips, pad shims and a mechanical wear sensor. Raptor models are not covered, even though they share the Bronco name.
Key features
- Ceramic compound designed for long life and consistent wear
- Quick and easy break-in with minimal dust during normal use
- Low rotor wear with long pad life
- Balance of performance and road-going comfort for daily drivers
- Anti-rattle abutment hardware, stainless steel, included with most applications
- Wear indicator attached alongside a mechanical wear sensor
Ceramic pads and daily driving
Ceramic pads suit a vehicle that spends most of its time on pavement and light gravel. They generally run quietly and produce less dust, which keeps the front wheels cleaner between washes. Their friction holds steady as the brakes warm up, though they are less suited to repeated hard stops on steep grades, where a heavier compound may be preferred.
On a Bronco or Ranger that sees occasional off-road use, front pad choice matters less than rotor condition and caliper movement. Check the rotor face for scoring before fitting, make sure the slide pins move freely, and keep the wear sensor routed clear of the rotor. Replace the abutment clips and shims if they are bent or worn.
- Check rotor thickness and runout before fitting
- Lubricate slide pins with the correct lubricant
- Keep the wear sensor clear of moving parts
- Bed in new pads gently on the first drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | D2216 |
| UPC | 90127866283 |
| Axle | Front |
| Friction material | Ceramic |
| Grade | Premium |
| Pads per set | 4 |
| Backing plate color | Black |
| Slotted | Yes |
| Wear indicator attached | Yes |
| Pad wear sensor | Mechanical, included |
| Abutment clips included | Yes |
| Pad shims included | Yes |
| Mounting hardware included | No |
| Brake lubricant included | No |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
The manufacturer fitment list names two front-axle applications: the 2021–2024 Ford Bronco with Raptor models excluded, and the 2019–2021 Ford Ranger. The Ranger entry carries a ceramic material qualifier that matches this pad.
Raptor models are not covered, even though they share the Bronco name. Rear-axle pads and other Ford models are not covered by this front set. Verify year, model and trim against your own vehicle before ordering.
Installation notes
Fit the set to the front axle only, since this application is front-specific. Raise the vehicle and support it on jack stands, never on a jack alone, before removing the wheels. Check the wear sensor connection after fitting and confirm the pads sit square in the bracket with the shims in place. Brake lubricant and mounting hardware are left out of the box.
What’s included
Four front ceramic pads with abutment clips, pad shims and a mechanical pad wear sensor.
Not included: mounting hardware and brake lubricant.












