Overview
The Baer Brakes D0963 is a rear ceramic brake pad set for the 2003–2004 Dodge Dakota. Each set holds four premium-grade pads, made to replace the factory rear disc pads on these trucks, and comes with stainless steel abutment hardware for most applications.
The Claw pad uses a ceramic friction compound that Baer Brakes says gives consistent wear and performance with minimal noise and dust. The brand also describes low rotor wear and a balance between performance and everyday road use, which suits owners who drive their Dakota daily.
Key features
- Ceramic friction compound for consistent wear and performance
- Minimal noise and low brake dust in everyday driving
- Long pad life with low rotor wear
- Balanced for everyday road use, with a focus on performance and road civility
- Stainless steel abutment and anti-rattle hardware included with most applications
- Slotted pads with an attached wear indicator
Before you fit new pads
Rear pads work with the rotor and caliper as a system, so the condition of those parts matters as much as the pad itself. Before fitting, look at the rotor faces for deep grooves, blue heat marks or a lip at the outer edge, and check that the caliper slides move freely. A seized slide can cause uneven wear on new pads even when the pads are correct for the vehicle.
Ceramic pads are generally quieter and produce less visible dust than semi-metallic pads, which suits daily driving. They usually run cooler but grip less aggressively when cold, so drivers who tow or descend long grades may want to discuss the choice with a technician. Replacing both sides of an axle together keeps braking balanced, and a gradual bed-in lets the pad transfer an even layer to the rotor.
- Inspect rotor faces and caliper slides before fitting
- Replace both sides of the same axle together
- Keep lubricant off the friction surface
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | D0963 |
| UPC | 844165017899 |
| Pads per set | 4 |
| Axle | Rear |
| Friction material | Ceramic |
| Grade type | Premium |
| Slotted | Yes |
| Wear indicator | Attached |
| Abutment clips included | Yes |
| Mounting hardware included | Yes |
| Brake lubricant included | No |
| Backing plate color | Black |
| Emission code | 6 |
| Drive | 2WD, 4WD |
| Country of origin | CN |
Vehicle fitment
It fits the rear axle of 2003–2004 Dodge Dakota trucks with rear disc brakes, in both 2WD and 4WD configurations.
It fits the 2003–2004 Dakota only, so other Dakota model years are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The set includes abutment clips and mounting hardware, so the stainless steel abutment hardware supplied with the pads is used during installation. Brake lubricant is not included, so have a suitable lubricant ready for the contact points. Follow a standard bed-in procedure before heavy braking, and replace both sides of the same axle together. Brake work affects stopping ability, so inspect the rotors and calipers before fitting new pads.
What’s included
A set of four rear brake pads with stainless steel abutment clips, noise suppression hardware and mounting hardware for most applications.
Not included: Brake lubricant.
