Overview
The Axia Alloys registration sticker mount, part number MODREGPLT-BK, is a mounting plate for a California green registration sticker. It lets you mount the sticker on either a horizontal or vertical bar with a diameter from seven-eighths inch to 2.375 inch.
The plate is the original size, with a mounting surface of 4.0 inch by 2.55 inch. It attaches to a bar, so the bar diameter matters more than the vehicle.
Key features
- Designed as a California green sticker plate
- Mounts on horizontal or vertical bars
- Accepts bars from seven-eighths inch to 2.375 inch in diameter
- Original size plate from the maker
- Mounting surface of 4.0 inch by 2.55 inch
Mounting a sticker on a bar
A sticker plate is only as steady as its grip on the bar, so the bar itself matters most. A plate that is too large or too small for the diameter will rock or slip, and it should not be forced onto the bar. Clean the bar where the plate will sit so the clamping surfaces seat evenly and do not trap dirt that could loosen the mount over time.
Before drilling or clamping, decide whether the sticker will sit on a horizontal or vertical run, and confirm the surface has enough clear space for the sticker to stay visible. Tighten the fasteners evenly and recheck them after the first few drives, since vibration can work a mount loose on any bar.
- Measure the bar diameter at the mounting spot
- Clean the bar before seating the plate
- Recheck fasteners after the first few drives
Specifications
| Brand | Axia Alloys |
|---|---|
| Part number | MODREGPLT-BK |
| Plate type | California green sticker plate |
| Mounting | Horizontal or vertical bar |
| Bar diameter | Seven-eighths inch to 2.375 inch |
| Mounting surface | 4.0 inch by 2.55 inch |
Vehicle fitment
Confirm fit by measuring your bar before ordering, since the plate works with bars from seven-eighths inch to 2.375 inch in diameter.
Installation notes
Measure the bar before ordering, because the plate covers only bars from seven-eighths inch to 2.375 inch in diameter. Verify that your fasteners suit the plate and bar before mounting.













