Overview
The 1.5-inch clear Axia Alloys strap clamp, part AXIMODCL1.5-C, is a billet clamp that snaps onto roll cage tubing for accessory mounting.
Its low profile keeps the area around the tubing clear, which helps with windshields, roof panels and other accessories.
Key features
- Billet clamp for roll cage tubing
- Low profile around the tubing
- Clear finish
- Part of the Modular Clamping System
Measuring roll cage tubing
A strap clamp only works when its size matches the tube it wraps. Measure the tubing at the spot where the clamp will sit, not at a joint or a bend, because a curved or welded section can give a misleading reading. Take the reading with a tape or caliper, and write it down before you buy any accessory that uses the clamp.
Roll cages vary in tube size, and a clamp that is too loose will slip under load while one that is too tight can scratch the tube or deform the mount. Tighten the fasteners evenly, and check the clamp after the first few trail runs. Accessories hung from clamps add weight, so spread the load across more than one point where you can.
- Measure at a straight section of tubing
- Tighten the fasteners evenly across the clamp
- Check the clamp position after the first trail runs
Specifications
| Brand | Axia Alloys |
|---|---|
| Part number | AXIMODCL1.5-C |
| Clamp size | 1.5 inch |
| Finish | Clear |
| Construction | Billet |
| System | Modular Clamping System |
Vehicle fitment
This clamp is not tied to a vehicle, and no model year is named. Measure the cage tubing before ordering to confirm the 1.5-inch size is right.











