Overview
The Aries Offroad D-Ring Shackles in black (part number 2166071) are forged steel shackles rated to 12.5K lbs each. Aries designed them to fit the winch mounts of ARIES TrailCrusher front and rear bumpers, with a 7/8 inch diameter pin. Two shackles come in the package.
The shackles can also be used on other vehicles, including a Jeep Wrangler JK, but the weight rating is limited to the capacity of the mounting structure. The fastener pin is hot-dipped galvanized for corrosion resistance.
Key features
- Forged steel shackles with a 12.5K lbs rating each
- 7/8 inch diameter pin
- Made for ARIES TrailCrusher front and rear bumper winch mounts
- Carbide black powder coat finish for durability and rust resistance
- Hot-dipped galvanized fastener pin
Recovery gear inspection and use
Shackles are a link in the recovery chain, so each part of the setup should be rated for the load. Before use, check the pin, the bolt and the shackle body for bends, cracks or deep rust. A pin that does not seat fully or turns freely may not hold, and should be replaced before it is used for a pull.
The powder coat protects the steel body, but it can chip at the bow and pin, so touch up small chips to slow rust. Keep the shackle clear of the line of pull, and avoid side loading the bow, which can bend it. Replace any shackle that has been overloaded or dropped from height, even if it looks undamaged.
When matching shackles to a winch line, consider the shackle rating, the pin diameter and the mount hole size together. A stronger line does not raise the rating of the weakest link. Store the shackles dry and check them again after each recovery.
Specifications
| Brand | Aries Offroad |
|---|---|
| Part number | 2166071 |
| Pin diameter | 7/8 inch |
| Weight capacity | 12.5K lbs each |
| Material | Forged steel |
| Finish | Carbide black powder coat; hot-dipped galvanized fastener pin |
| Quantity | 2 shackles |
Vehicle fitment
Fitment is for ARIES TrailCrusher front and rear bumper winch mounts. Other uses, such as on a Jeep Wrangler JK, depend on the capacity of the mounting structure.
The mounting structure sets the usable load, so check it before relying on a rating. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rating is limited by the mounting structure, check the capacity of the bumper or mount before using these shackles for recovery.
What’s included
Two shackles, with a 7/8 inch pin and black finish.
Not included: ARIES TrailCrusher bumpers or winch mounts, which the shackles are made to attach to.















