Overview
The Rugged Ridge D-Ring Set, part number 11235.01, is a pair of zinc-coated D-rings made for use with Rugged Ridge stinger and D-ring mounts. The set is sold as a pair and is marked universal application.
The zinc coating is a galvanized finish. The UPC is 804314076030.
Key features
- Zinc coated (galvanized) finish
- Sold as a pair
- Made for use with Rugged Ridge stinger and D-ring mounts
- Universal application, not tied to one vehicle
Choosing the right mount
A D-ring is only as good as the mount it bolts into. Before buying, confirm that the mounting hole size and bolt pattern on your bumper or stinger match the D-ring pin, and that the mount is rated for the recovery forces you expect. Mismatched hardware is a common cause of failed recoveries.
Zinc coated steel holds up well outdoors, but the coating can be scratched during installation or when the D-ring drags over rock. Look for bare spots, flaking or pitting, especially where the pin sits in the eye. Surface rust in a small scratch can be cleaned and touched up, while a bent or cracked D-ring should be replaced rather than straightened.
- Check the coating for chips after each trip
- Replace the D-ring if it shows cracks or deformation
- Keep the pin and threads free of mud and grit
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11235.01 |
| UPC | 804314076030 |
| Finish | Zinc coated (galvanized) |
| Quantity | Pair |
| Fitment | Universal Fit |
Vehicle fitment
Universal application, so it is not vehicle-specific. Fit depends on the Rugged Ridge stinger or D-ring mount you use, so confirm that mount before ordering.
What’s included
A pair of zinc-coated D-rings.
Not included: the Rugged Ridge stinger or D-ring mounts, which these D-rings are made to use with.


















