Overview
The Smittybilt 1/2 inch D-ring shackle is a black coated cast steel shackle with a 2 ton weight rating. It is a recovery rigging point for attaching straps and lines.
Its black coating is the finish on this version, and a zinc finish is offered in the same size.
Key features
- 1/2 inch size
- 2 ton weight rating
- Black coated
- Cast steel construction
Using it with straps
A D-ring shackle sits between the strap and the anchor point, so the shackle, strap and mounting point all share the load. Cast steel is strong for its weight but it is less forgiving than forged steel when it takes a sharp shock, so avoid jerking pulls and keep the pull smooth and steady. Lay the strap so it runs straight through the bow rather than bending over the edge of the pin.
Check the shackle before each trip. Look for cracks or flaking in the black coating near the bow, since a crack in the coating can hide a crack in the metal. Confirm the pin threads turn cleanly and that the pin seats fully. Retire a shackle that is bent, cracked or has a pin that no longer seats, rather than straightening it under load.
Specifications
| Brand | Smittybilt |
|---|---|
| UPC | 631410092271 |
| Product type | D-ring shackle |
| Size | 1/2 inch |
| Weight rating | 2 ton |
| Finish | Black coated |
| Material | Cast steel |
Vehicle fitment
This shackle is not tied to a specific vehicle. Match its 2 ton rating to your recovery load before buying.
Confirm the rating against your recovery setup before ordering.
Installation notes
Use the shackle with straps and anchor points rated for the same load, and keep the pin fully seated before pulling.









