Select your vehicle

AMI Square D-Ring (Brushed) – 8802

AMI

Shop AMI D-Ring Shackles on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • AMI 8802 brushed square D-ring, part number 8802
  • Paintable finish with a billet hook
  • 7/8 inch pin and 15,000 lbs rating
  • Sold individually; not vehicle-specific

Description

Overview

The AMI 8802 is a brushed square D-ring with a billet hook, a 7/8 inch pin and a 15,000 lbs rating. The finish is paintable.

It is a recovery attachment rather than a vehicle part, and it is sold individually.

Key features

  • Brushed, paintable finish
  • Billet hook
  • 7/8 inch pin diameter
  • 15,000 lbs rating

Matching a square D-ring to gear

A D-ring is one link in the recovery chain, so its pin and hook need to match the rest of the gear. Check that the pin fits through the eye of your shackle or strap without binding, and that the hook seats where the line will load it rather than on a corner. Pulls are rarely straight, so keep the ring in line with the strap as much as the setup allows.

Brushed and painted rings show scratches and paint chips quickly. Inspect the ring after each recovery for bends, flat spots on the pin area and cracks near the hook. Clean and dry it before storing, and keep it off damp trailer floors or truck beds where rust can start.

  • Confirm the pin fits your shackle before use
  • Inspect after every recovery for bending or cracks
  • Store dry to limit surface rust

Specifications

Brand AMI
Part number 8802
UPC 660936190116
Finish Brushed, paintable
Hook Billet
Pin diameter 7/8 inch
Rating 15,000 lbs
Quantity Sold individually

Vehicle fitment

Fitment is not tied to any vehicle, so choose this D-ring by pin size and rating for the gear you connect.

What’s included

One brushed square D-ring, sold individually.

SKU: ASM8802 Category:

Specification

Shipping weight 3.50 lbs
Package dimensions 6.00 × 6.00 × 2.00 in
brands

Questions & Answers

Is the AMI 8802 paintable?

Yes. The finish is brushed and can be painted. The D-ring also has a billet hook and a 7/8 inch pin.

What is the rating on the AMI 8802?

It is rated at 15,000 lbs. The pin is 7/8 inch and the hook is billet, so compare these figures with your shackle or strap before connecting it to a winch line or other recovery gear.

Does the AMI 8802 fit my vehicle?

It is not vehicle-specific, so no year, make or model is listed. Choose it by its rating and pin size for your recovery setup, and check other gear before connecting.

What should I check before using a D-ring in a recovery?

Confirm the pin fits your shackle or strap and that the ring's rating is above the expected load. Inspect for bends, cracks and wear, and make sure the attachment point on the vehicle can carry the pull.

Can a painted D-ring be reused after a hard pull?

Yes, if it shows no bending, cracking or deformation. Paint chips can expose bare metal, so touch them up and check the pin and hook area before reuse. Replace any ring that is bent or cracked.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop AMI D-Ring Shackles on Amazon