Select your vehicle

ARB Summit Step (Silver Anodised) – 4423010

ARB 4x4 Accessories

Shop Toyota Tacoma Nerf Steps on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2015 to 2021 Toyota Tacoma in listed trims
  • Part number 4423010 (ARB4423010) from ARB 4×4 Accessories
  • Silver anodised finish
  • Laser cut, CNC bent and welded at ARB facilities

Description

Overview

The ARB Summit Step in silver anodised finish, part number 4423010 (also written ARB4423010), is a side step, also called a nerf bar or running board step. It fits the 2015 to 2021 Toyota Tacoma in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and Trail trims.

Parts are cut by laser and guillotine, ground by robot, and bent and machined on CNC equipment before being welded with MIG, TIG, robot or spot methods. Finishing happens in powder coating and spray painting centers, under a quality control system.

Key features

  • Silver anodised finish
  • Made at ARB facilities using laser cutting, CNC bending and machining
  • Welding with MIG, TIG, robot and spot welding equipment
  • Powder coating and spray painting centers at the plants
  • Quality control system that ARB says keeps standards high
  • Direct fit listing for the 2015 to 2021 Toyota Tacoma

Side step use and upkeep

A side step gives a foothold for climbing into a tall truck and helps keep mud and dust off the lower body. On the trail, it can take contact from rocks and stumps, so the mounting bolts see repeated loading. Good placement and secure fasteners matter as much as the step itself.

Before fitting, measure your ground clearance and think about how the step will sit with your tires, approach angle and any skid or rock protection you already run. Anodised finishes resist everyday wear well, but scratches should still be cleaned and inspected so corrosion does not start underneath. Wash the step after salt or mud exposure and check its bolts periodically.

  • Check mounting bolts after rough trail use
  • Clean salt and mud from the underside
  • Inspect scratches for early corrosion
  • Confirm tire clearance at full suspension travel

Specifications

Brand ARB 4×4 Accessories
Part number 4423010 (ARB4423010)
Finish Silver anodised
Fabrication Laser cutting, guillotining, robot grinding, CNC bending, machining and turning
Welding MIG, TIG, robot and spot welding
Coating Powder coating and spray painting
Fitment type Direct fit

Vehicle fitment

It fits the 2015 to 2021 Toyota Tacoma in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and Trail trims. As a vehicle-specific part, the year, model and trim must match your truck.

This step is for the 2015 to 2021 Toyota Tacoma. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the package contents, including any mounting hardware, before starting installation.

Fitment

VehicleYearsTrims
Toyota Tacoma2015–2021Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, Trail

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the ARB Summit Step fit a Toyota Tacoma?

Yes, it fits the 2015 to 2021 Toyota Tacoma in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and Trail trims. Confirm your vehicle's year, model and trim before ordering.

What is the ARB Summit Step part number?

The part number is 4423010, also written ARB4423010. The brand is ARB 4x4 Accessories and the finish is silver anodised.

Does the step come with mounting hardware?

Check the package contents against your installation steps before starting work, including any mounting hardware that comes with the step.

Where are ARB steps made?

ARB makes its steps in its own facilities, which use laser cutting, CNC bending, MIG and TIG welding, and powder coating and spray painting.

Can a side step be used to carry gear?

A side step is meant for foot placement when getting into the cab, not for carrying loads. Keep heavy gear off it and stand on it only as intended. Repeated heavy weight can loosen mounts over time, so inspect the bolts after heavy use.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tacoma Nerf Steps on Amazon