Overview
The ARB 60069 is a gas-charged Nitrocharger shock absorber from the Old Man Emu (OME) 4WD suspension range. It is a direct fit, so confirm the vehicle before ordering.
OME valved this shock for heavily loaded vehicles, added accessories and long runs on harsh Outback roads. OME engineers work only on 4WD suspension systems.
The 60069 is a gas-charged Nitrocharger shock. Australian vehicles are often heavily loaded and driven on harsh Outback roads, and OME tuned the valving for those conditions. OME engineers work only on 4WD suspension systems, and the design was developed with both original equipment and OME springs in mind.
Vehicle years and models for the 60069 must be confirmed before buying. Its valving suits loaded driving and Outback use, so consider typical load. Measure the existing shock before ordering.
Key features
- Gas-charged Nitrocharger design
- Valved for loaded vehicles and accessories
- Developed with both original equipment and OME springs in mind
- Built for on-road and off-road use
Loaded driving and suspension
Heavy loads push a shock to work harder, which can heat the damping oil and wear the valving over time. Vehicles that regularly carry gear, tow or run added accessories put extra force through the mounts, so inspect them more often than a lightly loaded vehicle. Consistent maintenance helps the shock perform as designed.
Outback and gravel driving sends repeated impacts into the shock body and eyes. Look for dents in the tube, oil seepage around the seal, and cracked rubber at the mounts. Matching the spring rate and tire size to the load matters too, since a shock cannot correct an overloaded suspension.
- Check mounts after long gravel runs
- Look for oil on the shock body
- Inspect for dents or bent shock tubes
- Recheck load ratings for typical cargo
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 60069 |
| UPC | 9312891031393 |
| Hydraulic or gas charged | Gas charged |
| Fitment type | Direct fit |
| Country of manufacture | Australia |
Vehicle fitment
Confirm the year, model and trim for your vehicle before installing it.
What’s included
Part 60069 is one shock absorber only, without bushes or hardware.








