Overview
The ARB Winch Install Kit, part number 3532070, mounts a winch in an ARB bumper. It is a truck and SUV style kit with universal fit.
Because the kit mounts a winch to a bumper, confirm your ARB bumper and winch match the kit before ordering.
Key features
- Helps mount a winch in an ARB bumper
- Designed for truck and SUV style vehicles
- Universal fit, with the bumper and winch deciding the match
Load paths and mount checks
A winch mount carries the full pulling load of the winch, so the load path runs from the winch through the mount and into the bumper and frame. The bumper and mounting points need to be solid before any recovery. Look at welds, bolt holes and brackets for cracks or movement before each use, and make sure the winch base seats fully against the mount.
Recovery forces are much higher than the winch’s everyday load, so pair the winch with appropriate recovery gear. Use straps and shackles rated for the load, keep people clear of the line, and avoid sharp angles on the cable. After a hard pull, recheck every fastener and bracket.
- Inspect welds and brackets before each use
- Seat the winch base fully against the mount
- Use rated straps and shackles
- Recheck fasteners after a heavy pull
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 3532070 |
| UPC | 9332018005687 |
| Style | Truck and SUV |
| Fitment | Universal fit |
Vehicle fitment
The kit is for truck and SUV style vehicles that use an ARB bumper. Fit depends on the bumper and winch, not a single vehicle model.
Check your bumper and winch compatibility before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A winch mount carries the full pulling load of the winch, so check every mounting point and fastener before the winch is used.
What’s included
Check the kit contents against your installation before starting.
Not included: the winch itself and the ARB bumper the kit mounts to.









