Overview
The ARB Radius Arm Bracket, part number FK70, is a direct-fit bracket for the Ford F-250 and F-350 Super Duty. It fits the 2011–2015 models in the King Ranch, Lariat, Platinum, XL and XLT trims.
Check the bracket’s dimensions and mounting method against your truck before installation.
It is a direct fit for the 2011–2015 Super Duty models named above. Confirm your year and trim against your truck’s door sticker or title before ordering.
Radius arm geometry
The radius arm controls fore-aft axle location and resists torque when the truck accelerates or brakes, so its mounting points carry real load. A bracket that positions the arm correctly helps keep the axle square and reduces wander on the road. Inspect the bracket welds and fastener holes for cracks, elongation or rust, especially on a truck used off-road.
Radius arm bushings and the arm itself often wear together, so check them when the bracket is fitted. Make sure the arm moves freely without binding and that the axle sits square after installation. Tighten fasteners to your truck’s service torque values, and recheck them after the first few drives.
- Inspect welds and holes for cracks
- Check radius arm bushings for wear
- Confirm the axle sits square
- Recheck fasteners after the first drives
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | FK70 |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2011–2015 Ford F-250 Super Duty and F-350 Super Duty in the King Ranch, Lariat, Platinum, XL and XLT trims.
Ford models other than the F-250 and F-350 Super Duty, and years outside 2011–2015, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the bracket’s mounting points against your truck before starting, and have the correct fasteners ready.








