Overview
The Rancho RS66453B-3 is a radius arm kit, a suspension part that links an axle to the frame and controls its fore-and-aft position. It is used with part number RS66453B. Check the package contents against your installation before ordering.
Key features
- Radius arm kit from Rancho
- Used with part number RS66453B
- Direct-fit kit; confirm the vehicle before ordering
- Description mentions a plug-in connection to the factory wiring harness
Alignment after radius arm work
Radius arms take the axle’s torque under acceleration and braking, and they keep the axle from rotating under load. When a bushing or joint wears, the axle can wind up, the vehicle may hop on launch and tire wear can increase. Inspect the mounts, bolts and bushings at every service interval, and look for cracks or movement by hand.
Replacing a radius arm changes the axle location, so an alignment check and a driveline angle check are a sensible step afterward. Many owners also inspect the frame-side brackets when they replace the arm, because those carry the same loads. Retorque the fasteners after the first few hundred miles and recheck them after rough trail use.
Keep a record of the installation and the alignment readings, since they help when diagnosing vibration or tire wear later. Flexible bushings should be inspected after every off-road outing, and worn parts replaced in pairs so the axle stays square.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS66453B-3 |
| UPC | 39703006446 |
| Type | Radius arm kit |
| Used with | Part number RS66453B |
| Fit | Direct fit (per description, no vehicle named) |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and check that the axle and frame mounts match your application.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Radius arms control axle position, so an alignment check after installation is standard practice for this part type.
What’s included
The kit is a radius arm set. Check the package contents against your installation before starting.
Not included: A radius arm kit normally has no wiring, so confirm the package contents before installing.








