Overview
The ARB Intensity V2 LED Light Bar, part number ARBAR40CV2, combines spot and flood optics in one bar and is universal fit. It is a substantial upgrade on the earlier Iconic Australian light bar, and it is rated at 305 watts with over 25,000 lumens.
The bar uses dedicated flood and spot optics in a single housing. Together they give distance from the spot and width from the flood, with the flood section spreading light in front of the vehicle.
The Intensity V2 uses the same chassis design as the previous Intensity light, with updated OSRAM LED technology. The Hyperspot optics focus and intensify the light, keeping the beam on the road rather than spilling it into areas the flood already covers.
Key features
- 305 watts from the combined spot and flood bar
- Over 25,000 lumens listed
- Combined spot and flood optics in one light bar
- Hyperspot optics that focus the beam
- OSRAM LED technology in the V2 chassis
- Clean, crisp light with a refined color temperature that ARB says reduces eye strain on long trips
- Universal fit
- One bar with dedicated flood and spot optics, rather than separate lights
Mounting a combined light bar
A light bar is heavier and wider than a single pod, so the bracket needs to carry its weight and hold the aim under vibration. Check that the mounting points suit the bar and that it sits clear of the bonnet, windscreen and roof. Fit the bar square to the vehicle, since an angled bar throws the flood and spot off line.
A combined bar gives the spot and flood sections a shared housing, so the spot reach and flood width work together. Recheck bolts after the first rough trips, since a bar that moves under load will lose its aim. Keep the bar’s cable routed away from sharp edges where vibration could wear the insulation.
- Confirm the bracket is rated for the bar’s weight
- Check clearance to the bonnet and windscreen
- Recheck bolts after the first rough trips
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | ARBAR40CV2 |
| Light series | Intensity V2 |
| Type | Light bar |
| Configuration | Combined spot and flood |
| Watts | 305 watts |
| Lumens | Over 25,000 lumens |
| LED | OSRAM |
| Optics | Hyperspot spot optic and dedicated flood optic |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit and is not sized for one vehicle. The mounting position depends on the bar or bracket you fit, so plan that before installing.
Installation notes
The spot and flood sections together give long-range visibility and shoulder-to-shoulder visibility. A 305 watt light bar draws a lot of current, so it should be wired through a fused relay. Check local rules on driving lights before fitting it for road use.
What’s included
The product is one combined spot and flood light bar.
Not included: wiring, a switch, a relay or a mounting bracket.


















