Overview
The ARB CKSA12 is a Compact On-Board Air Compressor Kit from ARB 4×4 Accessories, part number CKSA12. It is a universal fit kit intended for competition vehicles, rock crawlers and other vehicles where a compact, light weight, quick-installing compressor is needed.
It weighs less than half as much as other compressor kits. Its low current draw of 5 amps at no load and 6.5 amps at full load lets it run on the 12 volt accessory supply of most 12 volt and 24 volt vehicles.
Key features
- Fully sealed components
- Pressure switch controlled air manifold system
- Hard anodized cylinder bore with carbon fiber piston rings
- Relocatable air filter assembly and ball bearing rotating components
Mounting a compact compressor
A lightweight compressor is easier to fit in tight spaces and on vehicles where payload matters. Its small size means the mounting location needs to handle vibration, so use a solid bracket and keep the unit away from heat sources. The relocatable air filter helps here, since the intake can sit where it stays clean rather than where the bracket happens to fall.
Power connections matter as much as the mount. Use a fused, properly routed supply and keep the wiring clear of moving parts and sharp edges. Because the kit runs on an accessory circuit, check that the supply can carry the draw before the first use, and re-inspect the connections after rough trails.
- Use a solid bracket that resists vibration
- Keep the unit away from direct heat sources
- Route wiring clear of moving parts
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CKSA12 |
| UPC | 881348006868 |
| Current draw | 5 amps at no load, 6.5 amps at full load |
| Power supply | 12 volt accessory supply |
| Cylinder bore | Hard anodized |
| Piston rings | Carbon fiber |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit, so it is not tied to a specific make, model or year. It suits vehicles that need a light, compact compressor.
Confirm your vehicle’s year, model and trim before ordering. Check that its accessory supply matches the 12 volt rating.
What’s included
Check the individual components you received against your installation before starting.
Installation notes
The air filter assembly can be relocated to suit the mounting location. Gather standard hand tools before starting, since the install is meant to be quick.









