Overview
The ARB 4X41S is a single clear halogen bulb with an H4 base. Bulbs in this line suit headlights and supplementary lights such as driving and fog lights.
Some bulbs in the wider IPF range work with factory wiring looms and resin headlights. Check whether your light accepts this bulb before fitting.
Key features
- Single bulb in the package
- Clear color
- Halogen bulb type
- H4 bulb base type
- Rated 60/80 watts
Replacing a single H4 bulb
Swapping one H4 bulb is simple, but a few checks keep the job clean. Confirm the bulb is the right base and that the lamp is meant for a headlight, driving light or fog light. Turn the vehicle off and let any hot bulb cool before you touch it. Hold the bulb by its plastic base and keep the glass clean, since oil from the fingers can shorten bulb life and create hot spots that stress the glass.
When you fit one bulb, look at the other lamp on the same vehicle. If it is old or yellowed, the new bulb may look mismatched, so decide whether to replace both at once. Check the socket and connector for corrosion or darkening, and clean or replace them if needed. Make sure the bulb seats fully and the retaining clip or cap locks in place, then test the light. Recheck the beam aim after the first few drives, since a bulb that sits slightly off-center can throw the light too high or low.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 4X41S |
| UPC | 70000517659 |
| Bulb type | Halogen |
| Quantity | Single |
| Color | Clear |
| Bulb base type | H4 |
| Watts | 60/80 |
Vehicle fitment
Universal fit is listed. The bulb is not tied to a vehicle model, so the H4 base and the lamp’s use decide compatibility.
Confirm your vehicle’s year, model and trim before ordering. Check that the light is designed for an H4 bulb.
Installation notes
Hold the bulb by its base rather than the glass, and let it cool before removing it from a hot housing.
What’s included
The package is a single bulb.
The single bulb is the only item in the package.









