Overview
The ARB CB Antenna Mount, part 5700050, is a bolt-on antenna bracket that gives a CB or amateur radio antenna a solid base. It bolts onto ARB Bull Bars, Winch Bars and Sahara Bars.
The bracket is a mounting accessory rather than a vehicle-specific part. It is meant for use with one of the ARB bar models named above, and no year, make or model is given.
Key features
- Bolt-on antenna bracket
- Fits ARB Bull Bars, Winch Bars and Sahara Bars
- Provides a base for a CB or amateur radio antenna
- Mounting accessory for bar-mounted antennas
Antenna placement on a bar
A bar-mounted antenna works best when it sits clear of obstacles and has a solid ground connection to the vehicle. Think about where the antenna will sit relative to the bar’s edges, the winch and any lights. Height and clearance both affect how the antenna performs and how it handles branches on the trail.
Coax routing is a common trouble point. Run the cable where it will not rub on edges or get pinched when the bar is bolted back on. Use cable clips and a grommet where the line passes through sheet metal. Check connectors for corrosion each season, and tighten the bracket bolts after the first few trail trips, since vibration can loosen them over time.
- Keep the antenna clear of branches and bar edges
- Route coax away from sharp edges
- Check the mount for corrosion each season
- Recheck bracket bolts after rough trails
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 5700050 |
| UPC | 70000496612 |
| Mount type | Bolt-on antenna mount |
| Compatible bars | ARB Bull Bars, Winch Bars, Sahara Bars |
Vehicle fitment
The bracket is made for ARB Bull Bars, Winch Bars and Sahara Bars, so match it to your bar before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a bolt-on bracket. Check the fastener set and whether drilling is needed before mounting.
What’s included
The item is the mounting bracket.
Not included: The antenna, coax cable and radio are not part of the bracket and would need separate parts.









