Overview
The ARB Deluxe Bull Bar 3450010 is a gloss black powder-coated winch bumper made for the 1984–1996 Jeep Cherokee (XJ). The winch mount and all required hardware come with the bar, and it accepts full size winches.
The bar is built with computer-designed parts, laser-cut components, mandrel bending and clean welds. Its mounting system is engineered for the Cherokee rather than being universal, and the bar weighs roughly 90 to 100 pounds.
The bar also provides mounting points for off-road lights and clevis or D-rings, and ARB lists amber driving lights alongside the integrated winch mount.
Key features
- Gloss black powder coat
- Accepts all full size winches, with an integrated winch mount
- Mounting hardware included
- Mounting points for off-road lights and clevis or D-rings
- Amber driving lights
- 1-7/8 inch diameter tubing for fender and grille protection
- Mounting system engineered for the specific vehicle
- Steel construction with D-ring mount
On the trail
An XJ bull bar sits in front of the grille and fenders, so it takes the first contact on rocks, brush and trees. That protection is useful, but the extra weight on the front end changes how the Cherokee steers and rides. Many owners find the springs and shocks settle in with a winch and a set of lights, so the front suspension is worth inspecting after the first few weeks.
Choosing the right setup comes down to how you use the vehicle. A winch adds the most weight, so plan your loads around it and keep heavy recovery gear behind the bar when it is not in use. Check the front wheel alignment after fitting, since a heavier bumper can change the way the tires wear.
- Check the front wheel alignment after fitting
- Keep the winch mount bolts snug
- Inspect the grille and fender area for contact marks
- Clean mud from the mounts to slow rust
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 3450010 |
| UPC | 837290001352 |
| Product type | Front bumper (bull bar) |
| Position | Front |
| Width | Full |
| Material | Steel |
| Finish | Gloss black powder coat |
| Tubing | 1-7/8 inch diameter, for fender and grille protection |
| Winch mount | Included, with hardware |
| Light mounts | Included |
| D-ring mount | Included |
| Fit type | Direct fit |
Vehicle fitment
The bar is made for the 1984–1996 Jeep Cherokee (XJ) in Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.
Cherokee (XJ) years after 1996 are not on the list for this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The winch mount comes with its own hardware, so a winch can be bolted to the bar once the bumper is on the Cherokee.
What’s included
- Bull bar front bumper, gloss black powder coat
- Winch mount with mounting hardware
- Light mounts and D-ring mount
Not included: A winch.












