Select your vehicle

AMI Big Stick Antenna (Polished) – 4215P

AMI

Shop AMI CB Antennas Mounts on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • AMI Big Stick Antenna part number 4215P in polished finish
  • 7/16 in. stainless steel with 6mm female threads
  • Fixed type, universal fit

Description

Overview

The AMI Big Stick Antenna, part number 4215P, comes in a polished finish and is made of 7/16 in. stainless steel. It is a fixed-type antenna with 6mm female threads and a universal fit.

No vehicle year, make or model is attached to this part, so the mount and its thread size decide where it can go.

Key features

  • Polished finish
  • 7/16 in. stainless steel
  • 6mm female threads
  • Fixed mount type
  • Universal fit.
  • Designed for reception.

Fixed antennas and trail vibration

A fixed antenna stays in one place, so it takes all of the vehicle’s movement through its base. On rough roads that movement can work the mount loose over time. Checking the base after the first few drives helps catch small shifts before they affect the connection or the sound from the radio.

Good mounting starts with a clean, flat contact surface. Where the base meets the vehicle, remove paint or grit so the mount bonds to bare metal, then tighten evenly. Use a lock washer or thread locker on fasteners that see regular vibration, and mark the position of the antenna so you can see if it has rotated.

Polished stainless steel holds up well when kept clean. Wash off road salt and mud, then dry the shaft before moisture can sit around the threads. Replacing a worn cable connector during the same service keeps the whole antenna system consistent.

  • Tighten the base after the first few drives
  • Clean contact points before remounting
  • Keep the cable away from sharp edges

Specifications

Brand AMI
Part number 4215P
UPC 660936163844
Material Stainless steel
Size 7/16 in.
Finish Polished
Threads 6mm female
Type Fixed
Fitment Universal fit

Vehicle fitment

Universal fit means the 4215P is not made for a particular vehicle. Your mount and its thread size determine whether it works for you.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The antenna’s 6mm female threads are the connection point, so confirm the mount provides a matching male stud.

What’s included

One polished Big Stick antenna, part number 4215P.

Not included: No mount, cable or radio is included.

SKU: ASM4215P Category:

Specification

Shipping weight 0.38 lbs
Package dimensions 19.00 × 1.00 × 1.00 in
brands

Questions & Answers

Is the AMI 4215P a universal fit antenna?

It is universal fit with a fixed type, so no year, make or model is matched. The mount and its thread size determine whether it will work on your vehicle.

What is the 4215P's finish?

The finish is polished, and the antenna is made of 7/16 in. stainless steel. The design is intended for reception.

What are the part number and UPC of the 4215P?

The AMI part number is 4215P and the UPC is 660936163844. Both details, along with the thread and material specs, are in the specifications table.

What should I check when a fixed antenna gets static?

Start with the connections. Check that the base is tight, the cable connector is clean and fully seated, and the mount is grounded to the vehicle body. Many static problems come from a loose or corroded joint rather than the antenna itself.

Can a polished finish be restored if it dulls?

Light polishing with a metal polish can restore shine on stainless steel. Use a soft cloth and avoid abrasive grit, which can leave fine scratches. Rinse and dry the shaft afterward, paying attention to the area around the threads.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop AMI CB Antennas Mounts on Amazon