Overview
The AMI Stubbie Antenna, part number 6221P, is a 21 in. polished stubbie on a 1/4 in. stainless steel rod for a fixed mount. It is a universal fit with three adapters included.
Length, rod size and finish are the specs to compare when choosing between stubbie antennas. Here the length is 21 in. and the rod is 1/4 in. stainless steel.
Key features
- 21 in. stubbie length
- 1/4 in. stainless steel rod
- Polished finish
- Fixed mount type
- Three adapters included.
- It is engineered for clear reception.
Care for polished stubbies
Long stubbies extend farther from the mount, which increases leverage on the base. A 21 in. rod can flex more at speed than a short one, so tighten the mount firmly and confirm it does not rock. Take extra care when parking in tight spaces, where the rod can catch on overhangs or garage door tracks.
Polished stainless resists rust well, but fingerprints and road grime dull the finish quickly. Clean with mild soap and dry fully to avoid water spots at the base. Inspect the adapter, rod and connection after rough use, and replace any cracked or bent parts. A loose joint often causes more noise than a faulty antenna.
- Retorque the mount after rough roads
- Wipe the rod after salt or mud exposure
- Check the base seal for cracks each season
Specifications
| Brand | AMI |
|---|---|
| Part number | 6221P |
| UPC | 660936002648 |
| Length | 21 in. |
| Rod | 1/4 in. stainless steel |
| Finish | Polished |
| Mount type | Fixed |
| Fitment | Universal fit |
| Adapters | Three included |
Vehicle fitment
The antenna is labeled universal fit, so it has no year, make or model match. Fit depends on the mount you have and which adapter suits it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Choose the adapter that suits your mount before fitting. The three supplied adapters are the only mounting parts described.
What’s included
A 21 in. stubbie antenna on a 1/4 in. rod, with three adapters.
Not included: Cable and radio are not included with this item.









