Overview
The AMI Stubbie Antenna, part number 6206K, is a 6 inch black stubby antenna on a 1/4 inch stainless steel rod with a black powder coat finish. Three adapters come with it so it can fit most vehicles.
It is a universal fit antenna, not built for a particular make, model or year. The mount depends on the adapter you choose, so confirm it matches your mounting point before installing.
Key features
- 6 inch stubby length
- 1/4 inch stainless steel rod
- Black powder coat finish
- Three adapters included
- Fixed mount type
Stubby antenna basics
A stubby antenna is short, so it avoids the flex and whip of longer rods and fits low-clearance spots. Its shorter length means the base connection carries more of the load when the vehicle moves, so the mount and adapter should be snug and free of play. Compare the mount’s diameter with the adapter before choosing, since a close fit prevents rattling.
Stainless steel rods hold up well to weather, but the black powder coat can chip at the base during installation. Touch up exposed areas, keep the joint dry, and retighten the adapter if the antenna starts to wobble. A quick check of the coax and connector after wet weather helps catch problems early.
- Confirm the adapter sits snug in the mount
- Touch up chips near the base
- Recheck the joint after wet or rough use
Specifications
| Brand | AMI |
|---|---|
| Part number | 6206K |
| UPC | 660936002518 |
| Length | 6 inch |
| Rod | 1/4 inch stainless steel |
| Finish | Black powder coat |
| Adapters | Three included |
| Mount type | Fixed |
| Fitment listed | Universal Fit |
Vehicle fitment
Fit depends on the adapter and mounting point you choose.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Select one of the three included adapters that matches your mount, then fasten the antenna.
What’s included
Three adapters are included with the antenna.









