Overview
The AMI Big Stick Antenna, part number 4206P, is a polished fixed-type antenna made of 7/16 in. stainless steel. It has 6mm female threads.
Fitment is universal, so no particular year, make or model is matched. Fixed type means the antenna stays in one position on the vehicle rather than folding or retracting.
Key features
- Polished finish
- 7/16 in. stainless steel construction
- 6mm female threads
- Fixed mount type
- Universal fit.
- Designed for reception
Matching mounts and threads
A fixed whip-style antenna depends on a solid connection between its base and the mount. Thread engagement matters: a 6mm stud that is cross-threaded or only partly engaged can loosen under vibration and change how the antenna performs. Start threads by hand and tighten only until snug.
Stainless steel shafts hold up well to weather, but the polished surface shows marks from grit and rubbing. Wipe the shaft with a clean cloth after mud runs and check the base for corrosion. If the mount is aluminum and the antenna is stainless, a little dielectric grease on the threads helps slow galvanic wear.
- Start threads by hand before tightening
- Check the mount stud for damage
- Wipe the shaft after muddy trips
Specifications
| Brand | AMI |
|---|---|
| Part number | 4206P |
| UPC | 660936163783 |
| Material | Stainless steel |
| Size | 7/16 in. |
| Finish | Polished |
| Threads | 6mm female |
| Type | Fixed |
| Fitment | Universal fit |
Vehicle fitment
Universal fit means the antenna is not made for a particular vehicle, so there are no years, makes or models to match.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 6mm female threads take a 6mm male stud, so the mount on your vehicle must offer that thread to fit this antenna.
What’s included
The polished Big Stick antenna, with 6mm female threads.
Not included: A mount, cable and radio are not included.









